Grizzly G0529 instruction manual Grounding, Extension Cords, 110V Operation

Page 9

Grounding

In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least resistance to disperse electric cur- rent. This tool is equipped with a power cord that has an equipment-grounding prong. The outlet must be properly installed and grounded in accor- dance with all local codes and ordinances.

Electrocution or a fire can result if the machine is not grounded correct- ly. Make sure all electri- cal circuits are ground- ed. DO NOT use the machine if it is not grounded.

This machine must have a ground prong in the plug to help ensure that it is grounded. DO NOT remove ground prong from plug to fit into a two-pronged outlet! If the plug will not fit the outlet, have the proper outlet installed by a qualified electrician.

NOTICE

The wire on the power cord with green or green and yellow striped insulation is the grounding conductor.

Extension Cords

110V Operation

If you find it necessary to use an extension cord at 110V:

¥Make sure the cord is rated Standard Service (grade S) or better.

¥The extension cord must also contain a ground wire and plug pin.

¥Use at least a 16 gauge cord if the cord is 50 feet long or less.

¥DO NOT use a cord longer that 100 feet!

No single list of electrical guidelines can be comprehensive for all shop environ- ments. Operating this machinery may require additional electrical upgrades spe- cific to your machine and shop environ- ment. It is your responsibility to make sure your electrical systems comply with all local electrical codes and ordinances.

 

 

 

 

 

 

 

 

 

 

 

 

G0529 Oscillating Spindle & Disc Sander

-7-

Image 9
Contents Model G0529 Oscillating Spindle Disc SanderPage Table of Contents Safety Instructions For Power Tools SafetyAMP Rating Length¥ Grip the Workpiece with Both Hands Introduction Volt Circuit RequirementsGrounding Extension Cords110V Operation Machine Features Unpacking SET UPParts Inventory DescriptionCircle Weight Load Clean UpSite Considerations Working ClearanceBeginning Assembly Cabinet AssemblyTo assemble the cabinet stand Installing Spindle Mounting SanderTo mount the sander to the top of the cabinet stand Table Inserts Squaring TableTo square the sanding tables To tilt the sanding table Squaring Disc SanderSanding Disc Installation Aligning TableTo align the table To adjust miter gauge Miter GaugeDust Collection To operate the power switch Power SwitchOperations GeneralSpindle Sanding To perform spindle sanding operationsPiece Against the Sanding Sleeve To perform miter sanding operations Miter SandingMaintenance Safety MaintenanceSchedule WeeklyDate Approximate Hours Of Use Maintenance Performed Maintenance LogAftermarket Accessories Reference InfoSize Model Machine Data Sheet Parts Diagrams & Lists 108 116 106 125 126 143 140 142 137 Description Flat Washer 1Ú4 Troubleshooting Warranty & Returns Warranty Card BOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCPage Call Today For a Free Full Color Catalog