Mounting Sander
When the cabinet has been completed, it is time to place the sander unit on top of the cabinet stand.
To mount the sander to the top of the cabinet stand:
1.With the help of an assistant, place the sander on the cabinet stand.
The Model G0529
weighs 143 lbs. Personal injury could occur if the machine is moved without addition- al assistance. Seek help when moving or lifting the machine.
2.Align the holes on the rim of the cabinet sides with the threaded holes in the rim of the sander.
3.Secure the cabinet and the sander together with the
!
Figure 5. Cabinet hole location.
Installing Spindle
To install the spindle onto the sander:
1.Disconnect the machine from the power supply.
2.Select the proper diameter of spindle sleeve. The Model G5029 comes with the following four sizes of spindle sleeves:
¥1Ú4"
¥5Ú8"
¥1 1Ú2"
¥2"
3.Make sure the tapered end of the spindle sleeve is clean before installing it into the sander spindle.
4.Use the supplied open end wrenches to secure the spindle as shown in Figure 6. NoteÑDo not over tighten the spindle sleeve, it could make removal difficult.
!
Figure 6. Installing spindle.
G0529 Oscillating Spindle & Disc Sander |