Grizzly G0518 Beginning Assembly, Stand To Base, To attach the stand to the base

Page 16

Beginning Assembly

This section will cover the basic assembly and adjustment instructions needed to begin opera- tion. Complete the assembly in the order provid- ed in this manual and then read the remaining portion of the manual before attempting any type of operation.

Your safety is important! Please follow the warnings below during this entire section:

Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.

!could occur if you con- nect your machine to theSerious personal injury

power source before you have completed the assembly process. DO

NOT connect the machine to the power source until instructed to do so.

Sharp edges on metal parts may cause person- al injury. Examine the edges of all metal parts before handling.

Stand To Base

To attach the stand to the base:

Attach the stand to the base with (4) M8-1.25 x 20 cap screws, (4) M8 flat washers, (4) M8 lock washers and (4) M8-1.25 hex flange nuts (Figure 5). Note–The lock washers should be installed between the flat washers and the head of the cap screws.

Stand

Fasteners

Base

Figure 5. Stand attached to base.



-14-			G0518 Drum / Flap Sander
-14-			G0518 Drum / Flap Sander

Image 16

Contents Drum / Flap Sander Page Table of Contents Safety Safety Instructions For Power ToolsLength Safety Instructions For Drum / Flap Sanders Keep Fingertips Away from MOV- ING PartsIntroduction CommentaryCircuit Requirements 110V Operation220V Operation Nema 6-15 plug and grounded outletGrounding Extension CordMachine Features Front view of sander G0518 Drum / Flap SanderSET UP Unpacking Piece InventoryBox 2 Qty Box 1 QtyBox 3 Qty Stand Base Hardware Recognition Chart Clean Up Weight LoadSite Considerations Working ClearanceStand To Base Beginning AssemblyTo attach the stand to the base Dust Hood Brackets Motor To StandTo attach the dust hood brackets to the stand Dust Hoods Acrylic Eye ShieldsTo attach the dust hoods to the brackets To attach the acrylic eye shields to the dust hoodsSanding Drum To attach the sanding drum to the arborFlap Sander To attach the flap sander to the arborDust Collection To attach dust collection hoses to the dust hoodsStart Up Operation Operation Safety Choosing SandpaperGrit Type Drum Sanding Checking air pressureCorrectly installed flap sander Flap SandingMaintenance Safety General MaintenanceBefore each use, perform the following checks Service Adjustments To replace the sandpaper flapsChanging Motor Voltage Reference Info Machine Data Sheet Parts Diagrams and Lists Description G0518 Drum / Flap Sander Motor Shaft Sandpaper Rolls 60, J Weight, Aluminum Oxide Sandpaper Cleaning SticksDust Collection Accessories Dia. Aluminum OxideWarranty and Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WACall Today For a Free Full Color Catalog