Grizzly G0518 instruction manual Operation Safety Choosing Sandpaper, Grit Type

Page 23

SECTION 6: OPERATION

Operation Safety

Choosing Sandpaper

 

 

 

Your safety is important! Please follow the warnings below during this entire section:

To avoid serious personal injury, read and become familiar with the entire instruction manual before using the Model G0518.

Damage to your eyes, lungs, and ears could result from failure to wear safety glasses, a dust mask, and hearing protec- tion while sanding with this machine.

Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.

The grit you choose will depend on the type of work, the species of wood and the stage of fin- ishing. Below is a chart that groups sandpaper into different categories and shows which grits fall into each one. We recommend using aluminum oxide sandpaper for best results.

Grit

Type

60Coarse

80-100 Medium

120-150

Fine

The general rule of thumb is to sand a workpiece with progressively higher grit numbers, with no one grit increase of more than 50; however, the type of wood you use and your stage of finish will determine the best grit types to install on your sander.

 

 

 

 

 

 

 

 

 

 

 

 

G0518 Drum / Flap Sander

-21-

Image 23
Contents Drum / Flap Sander Page Table of Contents Safety Instructions For Power Tools SafetyLength Keep Fingertips Away from MOV- ING Parts Safety Instructions For Drum / Flap SandersCommentary Introduction110V Operation Circuit RequirementsNema 6-15 plug and grounded outlet 220V OperationExtension Cord GroundingFront view of sander G0518 Drum / Flap Sander Machine FeaturesUnpacking Piece Inventory SET UPBox 3 Qty Stand Base Box 1 QtyBox 2 Qty Hardware Recognition Chart Working Clearance Clean UpWeight Load Site ConsiderationsTo attach the stand to the base Beginning AssemblyStand To Base To attach the dust hood brackets to the stand Motor To StandDust Hood Brackets To attach the acrylic eye shields to the dust hoods Dust HoodsAcrylic Eye Shields To attach the dust hoods to the bracketsTo attach the sanding drum to the arbor Sanding DrumTo attach the flap sander to the arbor Flap SanderTo attach dust collection hoses to the dust hoods Dust CollectionStart Up Grit Type Operation Safety Choosing SandpaperOperation Checking air pressure Drum SandingFlap Sanding Correctly installed flap sanderBefore each use, perform the following checks MaintenanceMaintenance Safety General To replace the sandpaper flaps Service AdjustmentsChanging Motor Voltage Reference Info Machine Data Sheet Parts Diagrams and Lists Description G0518 Drum / Flap Sander Motor Shaft Dia. Aluminum Oxide Sandpaper Rolls 60, J Weight, Aluminum OxideSandpaper Cleaning Sticks Dust Collection AccessoriesWarranty and Returns Warranty Card BOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCCall Today For a Free Full Color Catalog