Grizzly G0518 Dust Hoods, Acrylic Eye Shields, To attach the dust hoods to the brackets

Page 18

Dust Hoods

To attach the dust hoods to the brackets:

Attach the dust hoods to the brackets with (4) M8-

1.25x 40 cap screws, (4) M8 flat washers and (4) M8 lock washers (Figure 9).

Figure 9. Attaching one of the dust hoods.

Acrylic Eye Shields

To attach the acrylic eye shields to the dust hoods:

Loosely attach the acrylic eye shields to the dust hoods with (4) M8-1.25 x 20 cap screws, (4) M8 flat washers and (4) M8 lock washers (Figure 10). Final tighten the cap screws carefully as to not break the acrylic eye shields. Note–Match the correct acrylic eye shield to each dust hood by aligning the mounting holes.

Figure 10. Attaching one of the

acrylic eye shields.

 

 

 

 

 

 

 

 

 

 

 

 

-16-

 

G0518 Drum / Flap Sander

Image 18
Contents Drum / Flap Sander Page Table of Contents Safety Safety Instructions For Power ToolsLength Safety Instructions For Drum / Flap Sanders Keep Fingertips Away from MOV- ING PartsIntroduction CommentaryCircuit Requirements 110V Operation220V Operation Nema 6-15 plug and grounded outletGrounding Extension CordMachine Features Front view of sander G0518 Drum / Flap SanderSET UP Unpacking Piece InventoryBox 1 Qty Box 2 QtyBox 3 Qty Stand Base Hardware Recognition Chart Site Considerations Clean UpWeight Load Working ClearanceBeginning Assembly Stand To BaseTo attach the stand to the base Motor To Stand Dust Hood BracketsTo attach the dust hood brackets to the stand To attach the dust hoods to the brackets Dust HoodsAcrylic Eye Shields To attach the acrylic eye shields to the dust hoodsSanding Drum To attach the sanding drum to the arborFlap Sander To attach the flap sander to the arborDust Collection To attach dust collection hoses to the dust hoodsStart Up Operation Safety Choosing Sandpaper OperationGrit Type Drum Sanding Checking air pressureCorrectly installed flap sander Flap SandingMaintenance Maintenance Safety GeneralBefore each use, perform the following checks Service Adjustments To replace the sandpaper flapsChanging Motor Voltage Reference Info Machine Data Sheet Parts Diagrams and Lists Description G0518 Drum / Flap Sander Motor Shaft Dust Collection Accessories Sandpaper Rolls 60, J Weight, Aluminum OxideSandpaper Cleaning Sticks Dia. Aluminum OxideWarranty and Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WACall Today For a Free Full Color Catalog