Grizzly G0518 Dust Collection, To attach dust collection hoses to the dust hoods

3.Using the two arbor wrenches, tighten the arbor nut to secure the flap sander onto the arbor as shown in Figure 17. Note–Use the arbor “flat” shown in Figure 11 when using the arbor wrenches to tighten the left-hand threaded arbor nut.

!

Arbor Nut

Figure 17. Tightening the flap sander arbor nut.

Dust Collection

To attach dust collection hoses to the dust hoods:

Attach each dust hood to 4" hoses from your dust collection system (Figure 18).

Figure 18. Dust collection hose hook-up.

G0518 Drum / Flap Sander -19-