Grizzly G0518 instruction manual Reference Info

Page 29

SECTION 9: REFERENCE INFO

If you need parts or help in assembling your machine, or if you need operational information, please call the Grizzly Service Department. Our trained service technicians will be glad to help you.

If you have any comments regarding this manual, please write to Grizzly at the address below:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Important safety measures that are essential to the operation of this machine have been explained in Section 1: Safety. While most safety measures are generally universal, Grizzly reminds you that each workshop is different and safety rules should be considered as they apply to your specific situation.

We recommend you keep a copy of our current catalog for complete information regarding Grizzly's warranty and return policy. If you need additional technical information relating to this machine, or if you need general assistance or replacement parts, please contact the Service Department at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com.

Additional information sources are necessary to realize the full potential of this machine. Trade journals, woodworking magazines, and your local library are good places to start.

 

 

 

 

 

 

 

 

 

 

 

 

G0518 Drum / Flap Sander

-27-

Image 29
Contents Drum / Flap Sander Page Table of Contents Safety Instructions For Power Tools SafetyLength Keep Fingertips Away from MOV- ING Parts Safety Instructions For Drum / Flap SandersCommentary Introduction110V Operation Circuit RequirementsNema 6-15 plug and grounded outlet 220V OperationExtension Cord GroundingFront view of sander G0518 Drum / Flap Sander Machine FeaturesUnpacking Piece Inventory SET UPBox 3 Qty Stand Base Box 1 QtyBox 2 Qty Hardware Recognition Chart Weight Load Clean UpSite Considerations Working ClearanceTo attach the stand to the base Beginning AssemblyStand To Base To attach the dust hood brackets to the stand Motor To StandDust Hood Brackets Acrylic Eye Shields Dust HoodsTo attach the dust hoods to the brackets To attach the acrylic eye shields to the dust hoodsTo attach the sanding drum to the arbor Sanding DrumTo attach the flap sander to the arbor Flap SanderTo attach dust collection hoses to the dust hoods Dust CollectionStart Up Grit Type Operation Safety Choosing SandpaperOperation Checking air pressure Drum SandingFlap Sanding Correctly installed flap sanderBefore each use, perform the following checks MaintenanceMaintenance Safety General To replace the sandpaper flaps Service AdjustmentsChanging Motor Voltage Reference Info Machine Data Sheet Parts Diagrams and Lists Description G0518 Drum / Flap Sander Motor Shaft Sandpaper Cleaning Sticks Sandpaper Rolls 60, J Weight, Aluminum OxideDust Collection Accessories Dia. Aluminum OxideWarranty and Returns Warranty Card BOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCCall Today For a Free Full Color Catalog