Craftsman 172.27673 operating instructions Parts List Fig Sander, Ports

2. Cyclonic Dust Box

PARTS LIST (Fig. 1)

1. Sander

3. VacAdapter	_[l	_))
with Dual Dust _I/T		_L_LJ//
Ports		_k,._

4. Two 5-in. Hook and Loop

Sanding Discs with Pre-Punched

Holes

5. Operator's Manual

KNOWYOUR RANDOM ORBIT SANDER (Fig. 2)

I operatingOTE: Beforefeaturesattemptingand safetyto userequirementsyour sander,. familiarize yourself with all of the

Your Professional 5" Random Orbit Sander has a precision-built electric motor and it should

be connected to a 120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate on direct current (DC). The large voltage drop will cause a loss of power

and the motor will overheat. If the sander does not operate when plugged into correct

120-volt, 60-Hz AC ONLY outlet, check the power supply. This sander has a 10-ft., 2-wire power cord (no adapter needed).

This Random Orbit Sander has the following features:

1.Powerful 3.0 amp motor provides the torque, power and durability for a variety of continuous sanding applications.

2.Variable speed 5,000 to 12,000 OPM orbits per minute (no-load speed) is controlled by variable speed dial. Match with the correct speed and sandpaper grit to the surface being sanded for either fast material removal or a fine, smooth finish.

3.Random orbital action with 1/16-in. orbit diameter helps to provide a swirl free finish.

4.Ergonomically designed Palm Grip Handle with Molded-in Comfort Grip for maximum balance, control, gripping comfort and reduced operator fatigue.

5.Precision-tuned counterbalanced system reduces vibration for smooth operation and less operator fatigue.

11