Introduction, Operating Instructions | Bosch Power Tools MX25E

DM 2610958399 10-10:DM 2610958399 10-10 10/5/10 10:55 AM Page 10

Introduction

INTENDED USE

This Bosch Multi-X Oscillating Tool is intended for dry sanding of surfaces, corners, edges, for scraping, for sawing soft metals,

wood and plastic components, and for grout removal using the applicable tools and accessories recommended by Bosch.

Operating Instructions

LEARNING TO USE THE TOOL

Getting the most out of your oscillating tool is a matter of learning how to let the speed and the feel of the tool in your hands work for you.

The first step in learning to use the tool is to get the “feel” of it. Hold it in your hand and feel its weight and balance (Fig. 4). Depending on the application, you will need to adjust your hand position to achieve optimum comfort and control. The unique comfort grip on the body of the tool allows for added comfort and control during use.

FIG. 4

When holding tool, do not cover the air vents with your hand. Blocking the air vents could cause the motor to overheat.

IMPORTANT! Practice on scrap material first to see how the tool’s high-speed action performs. Keep in mind that your tool will perform best by allowing the speed, along with the correct accessory, do the work for you. Be careful not to apply too much pressure.

Instead, lower the oscillating accessory lightly to the work surface and allow it to touch the point at which you want to begin. Concentrate on guiding the tool over the work using very little pressure from your hand. Allow the accessory to do the work.

Usually it is better to make a series of passes with the tool rather than to do the entire job with one pass. To make a cut, for example, pass the tool back and forth over the work. Cut a little material on each pass until you reach the desired depth.

SLIDE "ON/OFF" SWITCH

The tool is switched "ON" by the slide switch located on the topside of the motor housing (Fig. 1).

TO TURN THE TOOL "ON" slide the switch button forward to the “I” .

TO TURN THE TOOL "OFF" slide the switch button backward the “0” .

ELECTRONIC FEEDBACK

Your tool is equipped with an internal electronic feedback system that provides a “soft start”, which will reduce the stresses that occur from a high torque start. The system also helps to keep the preselected speed virtually constant between no-load and load conditions.

VARIABLE SPEED DIAL

This tool is equipped with a variable speed dial. The speed may be controlled during operation by presetting the dial in any one of six positions (Fig. 1).

OPERATING SPEEDS

The Bosch Multi-X has a high oscillating motion of 8,000 - 20,000 /min (OPM). The high speed motion allows the Bosch Multi-X to achieve with excellent results. The oscillating motion allows the dust to fall to the surface rather than slinging particles into the air.

To achieve the best results when working with different materials, set the variable speed control to suit the job (See Speed Chart on Page 12 for guidance) . To select the right speed for the accessory in use, practice with scrap material first.

-10-

MX25E specifications

The Bosch Power Tools MX25E is a high-performance oscillating multi-tool designed for versatility and efficiency in a variety of applications. It is particularly well-suited for both professional contractors and DIY enthusiasts who require a reliable tool capable of tackling a range of tasks, from cutting and sanding to scraping and grinding.

One of the standout features of the MX25E is its powerful 2.5 amp motor. This motor provides excellent performance, allowing users to work effortlessly on tough materials such as wood, metal, and even drywall. The tool’s variable speed control allows for adjustment between 8,000 and 20,000 oscillations per minute, giving users the flexibility to select the optimal speed for their specific application. This ensures precise control whether the user is performing delicate tasks or more robust cutting jobs.

The MX25E boasts an innovative Starlock accessory interface, which allows for quick and tool-less accessory changes. This unique system is compatible with a wide range of attachments from various manufacturers, making it easy to switch tasks without wasting time. The tool is designed to minimize vibration and noise during operation, helping to enhance user comfort and productivity, especially during extended use.

Another notable characteristic of the Bosch MX25E is its ergonomic design. The tool features a soft-grip handle that provides a secure and comfortable grip, reducing fatigue during longer projects. Additionally, the compact size and lightweight construction make it easy to handle, ensuring maneuverability in tight spaces.

The integrated blade guard adds an extra layer of safety, allowing users to work with increased confidence. Furthermore, the MX25E features an onboard dust extraction port that can be connected to most standard vacuum systems, keeping the work area clean and minimizing dust exposure.

Durability is also a key aspect of the MX25E’s design. The robust construction ensures that the tool can withstand the rigors of heavy use day in and day out. With its combination of performance, versatility, and user-friendly features, the Bosch Power Tools MX25E stands out as a powerful multi-tool that is ideal for a broad range of professional and home improvement projects. This tool not only meets but often exceeds the expectations of users seeking reliability and superior performance in their toolkit.