Makita LSl21l instruction manual Holder assembly

3.Holders and holder assembly (optional accessories)

The holders and the holder assembly can be installed on either side as a convenient means of supporting workpieces horiziontally. Install them as shown in the figures. Then tighten the screws firmly to secure the holders and the holder assembly.

CAUTION :

Always support long workpieces level with the top surface of the turn base for accurate cuts and to prevent dangerous loss of control of the tuol.

When securing wide workpieces

I -Holderassembly I

Switch action

To prevent the trigger from being acciden- tally actuated, a lock-off button is provided. To start the tool, press in the lock-off but- ton and pull the trigger a t the same time. Release the trigger to stop.

When installing the vertical vise on the holder assembly

-Vertical vise

-Holder assembly

Lock-off button

Trigger switch

I

CAUTION :

Before plugging in the tool, always check to see that the trigger switch actuates properly and returns to the "OFF" position when released.

.When not using the tool, remove the lock-off button and store it in a secure place. This prevents unauthorized operation.

*Do not pull the trigger hard without pressing in the lock-off button. This can cause breakage of the switch.

13