Installing or removing saw blade

CAUTION :

Always be sure that the tool is switched off and unplugged before installing or removing the blade.

Use the socket wrench to loosen the hex
bolt which secures the center cover by
turning counterclockwise. Raise the safety
cover and the center cover.	Socket wrenc

Press the shaft lock to lock the spindle and use the socket wrench to loosen the hex bolt by turning it clockwise. Then re- move the hex bolt, outer flange and blade.

Hex bolt (left-handed)

Socket wrench

To install the blade, mount it carefully onto the spindle, making sure that the direction of the arrow on the surface of the blade matches the direction of the arrow on the blade case.

\-Outer	flange	r S p i n d l e
	Ring

Inner flange

Saw blade

I - - Hex bolt (left-handed)