Powermatic PWBS-14CS operating instructions Carton #2 Stand

Carton #2 - Stand:

Refer to Figure 12.

1Stand with motor (N)

1pulley cover (O)

1fence body (P)

2hardware packages, as follows.

Hardware package #3 contains: Refer to Figure 13.

2 fence hooks (HP3-A)

2miter gauge hooks (HP3-B)

1blade hook (HP3-C)

2pulley cover knobs (HP3-D)

4carriage bolts, M8x16 (HP3-E)

4flanged hex nuts, M8 (HP3-F)

2pan head screws, M5x12 (HP3-G)

2pan head screws, M4x10 (HP3-H)

Hardware package #4 contains: Refer to Figure 14.

1 resaw pin (HP4-A)

1resaw pin knob (HP4-B)

1fence rear hook (HP4-C)

2hex nuts, 1/4” (HP4-D)

1flat washer, 1/4” (HP4-E)

1lock washer, 1/4” (HP4-F)

1sliding pad (HP4-G)

4hex cap screws, 5/16”x3/4” (HP4-H)

4lock washers, 5/16” (HP4-J)

4flat washers, 5/16” (HP4-K)

7hex cap screws, M6x20 (HP4-L)

7lock washers, 1/4” (HP4-M)

7flat washers, 1/4” (HP4-N)

(*)the identifying letters/numbers in parentheses are used throughout the text to clarify assembly. For actual part numbers if re-ordering, see the part breakdowns at the back of this manual.

Figure 12

Stand carton

Figure 13

Hardware package #3

(stock no. PWBS14-HP3)

Figure 14

Hardware package #4 (stock no. PWBS14-HP)

11