Powermatic PWBS-14CS operating instructions Features and Specifications

Page 7

Features and Specifications

	Figure 1
Model Number		PWBS-14CS
Stock Number		1791216K
Resaw (Height) Capacity (in.)		6
Cutting Width (Throat Capacity)(in.)		13-1/2
Minimum Saw Blade Width (in.)		1/8
Maximum Saw Blade Width (in.)		3/4
Blade Length (in.)		93-1/2
Main Table Size (LxW)(in.)		15 x 15
Extension Table Size (LxW)(in.)		15 x 5-1/2
Blade Speed (SFPM)		3000
Table Tilt (deg.)		45 Right, 10 Left
Table Height from Floor (in.)		44
Dust Chute Outside Diameter (in.)		4
Minimum Dust Collection CFM Required		350
Motor	TEFC, 1.5HP, 1PH, 115/230V (prewired 115V), 11/5.5A, 60Hz
Recommended circuit (*subject to local electrical codes)		30A (115V), 20A (230V)
Overall Dimensions – Body and Stand fully assembled (LxWxH)(in.)		20 x 34 x 68
Stand Footprint (LxW)(in.)		16 x 17-1/2
Approximate Weights:
Body (Net/Shipping)(lbs.)		166/178
Closed Stand (Net/Shipping)(lbs.)		84/88

7

Image 7

Contents Part No. M-1791216 PowermaticWarranty Period Warranty and ServiceTable of Contents Parts List Table and Trunnion Assembly Page Introduction Features and Specifications Grounding Instructions Disconnect the machine from the power sourceVolt Operation Recommended Minimum Gauge AWG of Extension Cords Extension CordsUnpacking Contents of the Shipping ContainerCarton #2 Stand Mounting Band Saw to Stand Installation and AssemblyRefer to Figures 15 Refer to Figures 17 through Installing Drive BeltInstalling Extension Table Installing Trunnion SupportInstalling Main Table Leveling the Extension Table Installing Rear RailRefer to Figures 22 Refer to Figures 29 Installing Front Rail and Rip FenceAligning Fence to Blade Refer to Figures 33 Resaw GuideBlower Nozzle Work LampDust Collection Installing Quick Tension LeverRiser Block Accessory Stand AttachmentsRefer to Figures 39 AdjustmentsAdjusting 90 Table Stop Tilting the TableTable Aligned with Blade Installing BladesBlade Tension Guide Post and Upper Blade Guard Blade TrackingThrust Bearing Upper Bearing GuidesLower Bearing Guides Refer to Figures 47, 48Refer to Figures 51 Miter GaugeOn/Off Switch MaintenanceShape Blade SelectionWidth PitchMaterial SetBlade Breakage Crosscutting General ProcedureOperation RippingBlade Lead ResawingProbable Cause Remedy TroubleTroubleshooting Operating Problems Trouble Trouble Probable Cause Remedy Optional AccessoriesFor Radius Cutting Blade Selection GuideParts List Body Assembly Replacement PartsIndex No. Part No Description Size Qty Serial # 71210381 and higher Index No. Part No Description Size Qty Body Assembly 200MF 125VAC Parts List Closed Stand AssemblyClosed Stand Assembly PWBS14-FA Parts List Fence and Rail AssemblyFence and Rail Assembly Parts List Table and Trunnion Assembly Parts List Miter Gauge Assembly Parts List Blade Tension Lever Electrical Connections for PWBS-14CS