Bose 15/10 manual Care and Maintenance

Care and Maintenance

Problem	What to do
Remote control	• Check the batteries to see if they are installed properly or if they
is inconsistent or	need to be replaced. Refer to “Replacing the remote batteries” on
does not work	page 31.
	• Point the remote control at the sound system when you press a
	button.
	• Check that the system status indicator on the sound system flashes
	when you press the remote volume or mute button.
	• For the Solo 15 system remote
	- Point the remote control at the device you want to control.
	- Check that the remote button for the selected source flashes
	when you press the volume button.
	- There may be more than one device code for your brand of
	device. Refer to “Programming your remote to control your TV”
	on page 22.
	• Unplug the system’s power cord from the AC (mains) outlet for one
	minute.
	• Reset the system: Unplug the power cord for at least one minute.
	Plug the power in again and listen for the system to emit two tones
	confirming it has power.
Sound is	• Make sure cable connections are secure on the sound system and
distorted	TV.
	• If the sound system is connected to a TV output labelled
	VARIABLE (VAR), reduce the TV volume.
	• Bypass the TV and connect directly to the source using one of the
	Alternate setup methods. Refer to page 17.
	• Reset the system: Unplug the power cord for at least one minute.
	Plug the power in again and listen for the system to emit two tones
	confirming it has power.
Sound is coming	• Turn off your TV’s internal speakers.
from the TV	• Adjust the TV volume.
System status	• System error. Call Bose Customer Service.
indicator is red

30 - English