Lexicon MC-1 owner manual Vol, Mute, Select and Done remote control only

System Configuration

Lexicon

LED and redirects the current main zone input to the Record/Zone 2 outputs. From Standby, turns the unit on, selects the last used Zone 2 input, turns Zone 2 volume on to the value selected in the OUTPUT LEVELS menu and engages full mute in the main zone.

OFF

Turns off the Zone 2 outputs, and the associated front panel LEDs.

OSD (ON)

Displays a STATUS menu for the current input. Press Done to exit.

VOL ▲ and ▼

Displays, then adjusts the current Zone 2 volume level. Activated displays (FP or OSD) will show level and a bar gauge. When Zone 2 mute is engaged, these controls adjust volume without disengaging Zone 2 mute.

Mute

Engages Zone 2 mute and reduces the Zone 2 volume level to -80dB. Pressing again restores Zone 2 volume to its previous level.

SELECT and DONE (remote control only)

Displays, then adjusts Zone 2 left/right balance. Activated displays (FP or OSD) will show bar gauge and level in dB.

VCR, DVD, V Disc, TV, AUX, CD, Tuner, and Tape

Selects the Record/Zone 2 input and lights the corresponding front panel input LED (unless the input is blocked). From Standby, the input is selected with full mute engaged in the main zone.

Dolby, THX, Logic 7, and DTS (remote control only)

These controls set the Zone 2 volume level to the following levels. Dolby -30dB

THX -20dB

Logic 7 -10dB

DTS +00dB

2 CH, Party, TV M, and Music (remote control only)

These controls set the master volume level to the following levels. When Zone 2 mute is engaged, these controls set the Zone 2 volume level without disengaging mute.

2CH -30dB Party -20dB TV M -10dB Music +00dB

22