FieldServer 1.1 user manual Change UI Display Mode, Restart FieldServer

Page 34

Ruinet Utility User Manual

Page 34 of 46

ipconfig /release * ipconfig /renew *

The FieldServer checks every few minutes for the existence of other DHCP Servers and will disable itself if any are detected. A message on the RuiNet E screen will indicate when the DHCP Server has been disabled.

2.12.K - Change UI Display Mode

Press one of these keys O, N or E to change to the indicated User Interface Display mode.

Figure 2.20

The Expert Mode allows viewing of the different FieldServer tiers. The Novice and Normal modes currently have the same functionality in that it prevents viewing the FieldServer tiers.

NOTE: Normal and Expert modes are intended for the use of FieldServer personnel only. They provide no improved application functionality, and the added functions in these modes are neither documented, nor supported by FieldServer Technical Support. Consequently, it is strongly advised that these modes are not enabled.

2.13.Restart FieldServer

Push the ! key to restart the FieldServer. All stats and message screens will be cleared and connections with remote devices closed.

Figure 2.21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Image 34

Contents Ruinet Version RevTable of Contents Appendix C Advanced Topics PC Requirements Hardware Installation and SetupGeneral Overview SoftwareRemote User Interface RuiNet Connecting to a FieldServer FieldServer Information Settings Aspect FieldServer InformationFieldServer Information Settings Aspect Parameter DescriptionFieldServer Information Status Aspect Connection Overview Connection Overview ScreenConnection Overview Settings aspect Connection Overview Settings Aspect Reference source not found. for further informationConnection Overview Status Aspect Connection Overview Statistics Aspect Descriptor. See Error! Reference source not found Parameter Description Connection Overview Error Statistics Aspect NAKConnection Overview API Aspect Parameter Description Node Overview Node Overview ScreenNode Overview Settings Aspect Node Overview Status Aspect Node Overview Operating Statistics AspectParameter Description Node Overview Error Statistics Aspect Map Descriptor Overview Map Descriptor Overview ScreenMap Descriptor Overview Settings Aspect Map Descriptor Overview Status AspectMap Descriptor Overview Operating Statistics Aspect Map Descriptor Overview Error Statistics Aspect Data Array Overview Data Array Detail ScreenError Messages Driver MessagesDownload Configuration to FieldServer Procedure for Downloading a File from a PC to a FieldServerUpload Configuration from FieldServer Procedure to Upload a File from a FieldServer to a PCObtain the IP address using the Dhcp Client Procedure to Change a FieldServer’s IP AddressChange IP Address Obtain the IP address using the FieldServer’s Dhcp Server Change UI Display Mode Restart FieldServerPage Appendix A.2. File Download Appendix B.5. Disable Auto Connect Mode -m0 Appendix B.2. Connecting to a FieldServer using Name -yAppendix B.3. Broadcast Mode -ib Appendix B.4. The Most Recently Connected FieldServer -pAppendix B.7. Startup Screen Appendix B.6. Restart a FieldServer -bAppendix B.8. Transferring files -l, -f Appendix B.9. Downloading Files -u0 Appendix B.10. Uploading Files -u1Appendix B.12. Number of File Transfer Tries -n Appendix B.11. Forcing a Download -oAppendix B.14. Set Local File Name for a Transfer -l Appendix B.17. Version Information -v, -ve Appendix B.15. Help -hAppendix B.16. Create a Log File -a Appendix B.18. Skip date and time check on connect -m1Appendix B.22. Run in Test Mode Appendix B.21. Set Timeout -kAppendix B.19. Delete a File -z Appendix C.2. FieldServer Tiers Appendix C.3. Connecting to a FieldServer over the Internet Diagram below shows how this is typically doneAppendix D. Default settings for parameters Parameter Default Setting