FieldServer 1.1 Appendix B.9. Downloading Files -u0, Appendix B.10. Uploading Files -u1

Page 39

Ruinet Utility User Manual

Page 39 of 46

Appendix B.9. Downloading Files –u0

This command is used to transfer files from a PC to a FieldServer. In the following examples the target FieldServer is not specified. If there is a single FieldServer on the network then the files will be transferred to that FieldServer. If more than one FieldServer is connected to the network then RuiNet will provide a list and the transfer will begin once a FieldServer is selected from the list.

RuiNet –ldelivery.csv –u0 -o

Transfers the file delivery.csv from your computer to the FieldServer where it will be saved as config.csv. In this example the –ooption forces RuiNet to download the file even if delivery.csv (on host computer) and config.csv (on the FieldServer) are the same.

RuiNet -ldefault.htm –u0

Transfers the file default.htm from host computer to the FieldServer where it will be saved as default.htm.

RuiNet –lc:\temp\delivery.csv –fdelivery.csv –u0

Transfers the file delivery.csv from host computer’s temp folder on the C drive to the FieldServer where it will be saved as delivery.csv.

RuiNet –lconfig.csv –u0 –n3

Transfers the file config.csv from host computer to the FieldServer where it will be saved as config.csv. RuiNet expects that the file config.csv exists on the host computer and is located in the same folder as the folder where RuiNet is executed. In this example the –n3switch tells RuiNet, that if the transfer fails, to attempt the transfer a maximum of 3 times before giving up.

Wildcards are allowed on download filenames. RuiNet will present a list of the files marked for download and a list of the files already on the FieldServer for you to decide whether to proceed with the download. The “list download files” prompt can be overridden with a –cswitch.

RuiNet –ltest*.csv –u0

Transfers all files with filenames starting with test and ending with .csv to the FieldServer.

Appendix B.10. Uploading Files –u1

This command is used to transfer a file from the FieldServer to the PC. In the following example the target FieldServer is not specified. If there is a single FieldServer on the network then the files will be transferred with that FieldServer. If more than one FieldServer is connected to the network then RuiNet will provide a list and the transfer will begin once the required FieldServer is selected.

RuiNet -fconfig.csv –u1

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Version Rev RuinetTable of Contents Appendix C Advanced Topics Software Installation and SetupGeneral Overview PC Requirements HardwareRemote User Interface RuiNet Connecting to a FieldServer FieldServer Information FieldServer Information Settings AspectParameter Description FieldServer Information Settings AspectFieldServer Information Status Aspect Connection Overview Screen Connection OverviewConnection Overview Settings aspect Reference source not found. for further information Connection Overview Settings AspectConnection Overview Status Aspect Connection Overview Statistics Aspect Descriptor. See Error! Reference source not found Parameter Description NAK Connection Overview Error Statistics AspectConnection Overview API Aspect Parameter Description Node Overview Screen Node OverviewNode Overview Settings Aspect Node Overview Operating Statistics Aspect Node Overview Status AspectParameter Description Node Overview Error Statistics Aspect Map Descriptor Overview Screen Map Descriptor OverviewMap Descriptor Overview Status Aspect Map Descriptor Overview Settings AspectMap Descriptor Overview Operating Statistics Aspect Map Descriptor Overview Error Statistics Aspect Data Array Detail Screen Data Array OverviewDriver Messages Error MessagesProcedure for Downloading a File from a PC to a FieldServer Download Configuration to FieldServerProcedure to Upload a File from a FieldServer to a PC Upload Configuration from FieldServerProcedure to Change a FieldServer’s IP Address Obtain the IP address using the Dhcp ClientChange IP Address Obtain the IP address using the FieldServer’s Dhcp Server Restart FieldServer Change UI Display ModePage Appendix A.2. File Download Appendix B.4. The Most Recently Connected FieldServer -p Appendix B.2. Connecting to a FieldServer using Name -yAppendix B.3. Broadcast Mode -ib Appendix B.5. Disable Auto Connect Mode -m0Appendix B.6. Restart a FieldServer -b Appendix B.7. Startup ScreenAppendix B.8. Transferring files -l, -f Appendix B.10. Uploading Files -u1 Appendix B.9. Downloading Files -u0Appendix B.11. Forcing a Download -o Appendix B.12. Number of File Transfer Tries -nAppendix B.14. Set Local File Name for a Transfer -l Appendix B.18. Skip date and time check on connect -m1 Appendix B.15. Help -hAppendix B.16. Create a Log File -a Appendix B.17. Version Information -v, -veAppendix B.21. Set Timeout -k Appendix B.22. Run in Test ModeAppendix B.19. Delete a File -z Appendix C.2. FieldServer Tiers Diagram below shows how this is typically done Appendix C.3. Connecting to a FieldServer over the InternetParameter Default Setting Appendix D. Default settings for parameters
Top Page Image Contents