FieldServer 1.1 user manual Upload Configuration from FieldServer

Page 31

Ruinet Utility User Manual

Page 31 of 46

2.10.U - Upload Configuration from FieldServer

Press U to enter the file upload screen.

Upload means to transfer a file from the FieldServer to your PC.

Figure 2.16

Use the O key to enable the uploading of ‘other’ files.

When enabled you can upload files other than .csv from the FieldServer. Please exercise caution with this option.

Figure 2.17

2.10.1.Procedure to Upload a File from a FieldServer to a PC

•From the main menu, select “U” to go to the Upload screen.

•Select “R”, type in the remote file name (File on the FieldServer) and press <Enter>

•If the local file name is incorrect, select “L”, type the name and press <Enter>.

•Begin the upload by pressing “U”.

•When the upload is completed, the uploaded file may be opened with one of the listed editors. Note that the editors are not supplied with RuiNet and must be loaded on your machine to work effectively.

•See Appendix B.10 for more information

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Version Rev RuinetTable of Contents Appendix C Advanced Topics Software Installation and SetupGeneral Overview PC Requirements HardwareRemote User Interface RuiNet Connecting to a FieldServer FieldServer Information FieldServer Information Settings AspectParameter Description FieldServer Information Settings AspectFieldServer Information Status Aspect Connection Overview Screen Connection OverviewConnection Overview Settings aspect Reference source not found. for further information Connection Overview Settings AspectConnection Overview Status Aspect Connection Overview Statistics Aspect Descriptor. See Error! Reference source not found Parameter Description NAK Connection Overview Error Statistics AspectConnection Overview API Aspect Parameter Description Node Overview Screen Node OverviewNode Overview Settings Aspect Node Overview Operating Statistics Aspect Node Overview Status AspectParameter Description Node Overview Error Statistics Aspect Map Descriptor Overview Screen Map Descriptor OverviewMap Descriptor Overview Status Aspect Map Descriptor Overview Settings AspectMap Descriptor Overview Operating Statistics Aspect Map Descriptor Overview Error Statistics Aspect Data Array Detail Screen Data Array OverviewDriver Messages Error MessagesProcedure for Downloading a File from a PC to a FieldServer Download Configuration to FieldServerProcedure to Upload a File from a FieldServer to a PC Upload Configuration from FieldServerObtain the IP address using the Dhcp Client Procedure to Change a FieldServer’s IP AddressChange IP Address Obtain the IP address using the FieldServer’s Dhcp Server Restart FieldServer Change UI Display ModePage Appendix A.2. File Download Appendix B.4. The Most Recently Connected FieldServer -p Appendix B.2. Connecting to a FieldServer using Name -yAppendix B.3. Broadcast Mode -ib Appendix B.5. Disable Auto Connect Mode -m0Appendix B.7. Startup Screen Appendix B.6. Restart a FieldServer -bAppendix B.8. Transferring files -l, -f Appendix B.10. Uploading Files -u1 Appendix B.9. Downloading Files -u0Appendix B.12. Number of File Transfer Tries -n Appendix B.11. Forcing a Download -oAppendix B.14. Set Local File Name for a Transfer -l Appendix B.18. Skip date and time check on connect -m1 Appendix B.15. Help -hAppendix B.16. Create a Log File -a Appendix B.17. Version Information -v, -veAppendix B.22. Run in Test Mode Appendix B.21. Set Timeout -kAppendix B.19. Delete a File -z Appendix C.2. FieldServer Tiers Diagram below shows how this is typically done Appendix C.3. Connecting to a FieldServer over the InternetParameter Default Setting Appendix D. Default settings for parameters
Top Page Image Contents