Bosch Appliances D9412GV2 ## Defer Test, ## Hourly Report, If Expand Test Rpt in Phone, Status

D9412GV2/D7412GV2 Program Entry Guide 5.0 RADXSKED

Default: Blank

Selection: 1 to 11, 13 to 24, 28, 29

EN 118

9	Test Report: This function emulates		S## Defer Test	Yes	Defer the Test
	the Test Report? sub-function of the				Report.
	Send Report? keypad function		Default: No	No	Send the Test
	([COMMAND][4][1]). This function
			Selection: Yes or No		Report on
	generates a Test Report only from
	Area 1 but contains panel-wide status		Enable sked to defer the Test		schedule.
	information. The report is sent to the		Report
	phone(s) programmed for Test and
				Yes	Send the Test
	Status Reports in Section 2.3.8		S## Hourly Report
					Report every hour.
	Dialing Attempts on page 16.
			Default: No	No	Send the Test
	If Expand Test Rpt in Phone
			Selection: Yes or No		Report only as
	parameters is programmed as Yes,
					scheduled.
	the Test Report also includes all off-		Select Yes to send the Test
	normal states for events listed in Test
			Report every hour.
	Reports (refer to Table 13 on page
	20) and some events listed in
	Diagnostic Reports (refer to the
	footnotes with Table 14 on page 20)
	The Test Report can be deferred if
	any other report was sent since the
	last Test Report. To defer the Test
	Report, program S## Defer Test.
	The Test Report can be sent every
	hour beginning at the time scheduled
	in S## Time. To send a Test Report
	every hour, program S## Hourly Rpt.
		To meet UL 864
		requirements, use the
		Sked function to meet the
		daily Test Report
		requirement.
10	Status Report: This function		S## Defer Status	Yes	Defer the Status
	generates a Status Report for each				Report.
	area that is enabled. The report is		Default: No	No	Send the Status
	sent to the phone(s) programmed for
			Selection: Yes or No		Report on
	Test and Status Reports in Routing.
					schedule.
	The Status Report can be deferred if		Enable sked to defer the
	any other report was sent since the		Status Report.
	last Status Report. To defer the
	Status Report, program S## Defer
	Status.

Bosch Security Systems, Inc. 10/08 F01U003636-04