VeriFone manual Examining Connection Ports, Vx670 Primary Port Bottom View

TERMINAL SETUP

Examining Connection Ports

•A magnetic card reader, built into the right side. Swipe the card using the proper direction, with the magnetic stripe down and facing inward, toward the keypad.

•A green indicator LED indicates power is ON.

•An internal thermal printer at the back of the terminal.

•A smart card reader, built into the front of the terminal. For directions on how to use a smart card, see Conducting Smart Card Transactions.

•A SAM (security access module) compartment, built into the bottom of the terminal. The Vx670 terminal contains MSAM cardholders to support multiple stored-value card programs or other merchant card requirements.

NOTE VeriFone ships variants of the Vx670 terminal for different markets. Your terminal may have a different configuration. The following devices may or may not be present: a smart card reader, or zero or three MSAM cardholders. However, the basic processes described in this guide remain the same, regardless of terminal configuration.

Examining

Connection

Ports

The Vx670 terminal has one primary port that supports different peripherals through the use of various cables.

Figure 3 The Vx670 Primary Port (Bottom View)

16VX670 INSTALLATION GUIDE