TERMINAL SETUP
Charging the Spare Battery on the Base Station
1Insert the USB dongle into the USB port located at the back of the Base Station.
Charging the Spare Battery on the Base Station
Figure 24 Inserting External Dongle Into USB Port
2After inserting the external dongle into the USB port, place the Vx670 terminal onto the Base Station (see Powering Up the Base Station).
3Connect the peripheral to the external dongle.
The
1Connect the Base Station to a power source (see Powering Up the Base Station)
2Place the spare battery pack onto the Base Station as shown in Figure 25.
Figure 25 Putting Spare Battery Pack Into the Base Station
VX670 INSTALLATION GUIDE | 33 |