Sharp EC-T5180A, EC-S5170, EC-T5180B How To Use The On Board Tools, Heat Protection System

HOW TO USE THE ON BOARD TOOLS

CREVICE TOOL

For door tracks, narrow spots, etc.(Fig.12)

EXTENSION WANDS

For reaching ceilings, curtains, etc.(Fig.13) Combine these wands at the end of suction hose. (Fig.14-1)

When connecting two wands, match the illustrated mark to each other.(Fig.14-2)

SUCTION HOSE

For using ON BOARD tools, remove the suction hose from the nozzle head. (Fig.11)

UPHOLSTERY TOOL WITH DETACHABLE

BRUSH

Use the brush for upholstered furniture, table tops, books, lamps, baseboards, etc. (Fig.16) Use without the brush for draperies,

mattresses, clothing, carpeted stairs, etc.

Fig.11 (Fig.15)

Fig.14-1

Fig.14-2

Pull to Detach brush from tool

Fig.12

Fig.13 Turn to adjust cleaning angle Fig.15 Fig.16

HEAT PROTECTION SYSTEM

This vacuum cleaner has a special thermostat that protects the motor from overheating. If the vacuum cleaner suddenly shuts off, turn off the vacuum and unplug the cleaner. Check the vacuum cleaner for a possible source of overheating such as a full dirt compartment or clogged filters. If these conditions are found, empty the dirt compartment and clean the filters (see pages 10 and 11) or replace if necessary (see page 15). To maintain the best performance of your vacuum cleaner, we recommend emptying the dirt compartment before the dirt reaches the “Max Fill Line” and clean the filters.

9