Notice Magic Tea A6:Mise en page 1 25/01/08 14:33 Page 9
BEFORE FIRST USE |
| GB |
|
-Remove all packing, labels or accessories on the inside and outside of the product.
-Set the length of the power supply cord by winding it under the base. Wedge the cord into the slot.
-Operate your appliance as follows:
-fill with water up to the maximum level
-start by pressing button (7) and wait for the appliance to automatically stop
-rinse.
•Handle the teapot with care as it can be broken.
•Avoid thermal shocks: do not splash or fill with cold water when the appliance is still hot
INSTRUCTIONS FOR USE
-Remove the lid unit + brewing basket (Fig 2a), by keeping the buttons of the lid
(1) pressed down.
-Fill the teapot with the desired quantity of water
•Never fill the teapot above the maximum water level, nor below the minimum level.
-Detach the brewing basket (6) from the lid (1) by applying pressure to the lid then turning it slightly, and release.
-Place the tea or herbal tea in the brewing basket (6). Remove the cardboard label from bags.
Proportion to taste and in relation to the quality of the tea. As an indication, for 1 litre of water we recommend 1 bag/1 spoonful of tea for a light drink, 2 bags/2 spoonfuls for a fairly strong drink, 3 bags/3 spoonfuls of tea for a strong drink.
-Replace the lid by placing it on the brewing basket and inserting the pins of the basket in the slots of the lid, press and turn slightly, then release.
-Press the buttons on the lid and position the whole in the pot, taking care to ensure that the washer at the bottom of the rod is correctly centred in the hole.
(Fig 2b)
IMPORTANT:NEVER attempt to position the brewing basket first and then the lid on the teapot as you are likely to damage the plastic parts. Carefully follow the instructions.
-Release the buttons on the lid to lock it automatically to the pot.
-Start up the teapot by pressing switch “I”.
9