HP PE4240N 42 inch manual Protection

	Item	Description
A	Main power	Turns the AC power on and off. This switch is on from the factory. When this main power
	switch	switch is off, the TV is fully unpowered; the power/standby indicator light on the front of the
		TV is off, and neither the front panel power button nor the remote control can be used to turn
		on the TV. If you turn the main power switch off, wait at least 5 seconds before turning it on
		again.
B	AC in connector	Connect the included power cord here.
C	RS232C	This terminal is used for service only.
D	Audio for DVI-D	Connect the audio cable for the DVI-D input.
	connector
E	DVI-D (29-pin)	Connect a digital video cable for digital input signals from a PC monitor connector, or from
	input	a digital cable or satellite receiver set-top-box. This connector supports HDCP, a form of copy
		protection.
F	VGA, a D-sub	Connect an analog cable for input signals from a PC monitor connector. See your component
	(15-pin) input	user documentation for information about the connector types it supports.
G	Audio for VGA	Connect the audio cable for the VGA input.
	connector
H	External speaker	Connect the optional external speakers here, and then select external speakers in the OSD
	left and right	menus.
	output
K	Video Inputs	Connect composite video cable and left-right audio cables for one or two devices such as a
		VCR, a DVD player, or a laser disc player.
L	Audio Output	Connect audio out left-right cables to a powered amplifier.
M	S-video Inputs	Connect S-video cable and left-right audio cables for one or two devices such as a VCR, a
		DVD player, or a laser disc player.
N	Component Video	Connect cables for component video input.
	Inputs	Use YPbPr 1 for input from devices that support High Definition signals such as a progressive
		scan DVD player, or a digital cable or satellite set-top-box. This connector supports 480p,
		720p, and 1080i format video signals.
		Use YPbPr 2 for input from devices that support component signals in 480i video format such
		as a VCR, a DVD player, or a laser disc player.
P	Audio for	Connect audio left-right cables for the YPbPr-1 input and the YPbPr-2 input.
	component video
	inputs connectors
R	TV Antenna	Connect broadcasting (terrestrial) antenna or cable TV signal cable here.
	Cable In

Introduction 11