Connecting an S-Video Source
Use S-video cable to connect your S-video source, such as a VCR, to the TV.
To make these connections:
1Turn off the TV and the VCR.
2Connect one end of the S-video cable to the S-video output connector on the back of your VCR, and connect the other end to the S-video connector at the S-Video Inputs on the back of the TV. Use standard RCA audio patch cords to connect the audio from your VCR to the TV (if your VCR has this capability). Be careful to keep the audio right and left channel connections correct for stereo sound.
3Turn on the TV and the VCR. Insert a cassette into the VCR and play it.
4Select S-video 1 or S-video 2 (AV) as the input source for the main TV picture (so you see the image playing from the VCR) by using the front panel buttons or the TV remote control. Refer to “Selecting the input source” on page 26.
5To set up the TV remote control to operate the VCR, refer to “Programming the remote control for component control” on page 53.
Refer to your VCR owner’s manual for information about your equipment’s video output requirements.
Set Up 19