HP PE4240N 42 inch manual Programming the remote control for component control

Page 57

Programming the remote control for component control

Programming the component code

1Turn on the TV. Turn on the cable or satellite set-top-box, VCR, or DVD and, if applicable, insert media (a cassette or a disc).

NOTE: Please read steps 2 through 4 completely before proceeding. We recommend highlighting or writing down the codes and device you wish to program before performing step 2.

2On the remote control, press CBL/SAT button or DVD/VCR button once. Press and hold SETUP until the red light blinks twice, then release SETUP.

3Use the Manufacturer’s Codes (see listing that follows) to locate the type of component by brand name and then enter the first four-digit code for your component. If performed correctly, the red light blinks twice.

NOTE: If the red light did not blink twice, then repeat steps 2 and 3, entering the code again.

4Aim the remote control at the component and press PWR once. The component should turn off. If it does not respond, repeat steps 2 and 3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code; see “Searching for the component code” on page 53.

NOTE: If the device does not have a power button, press PLAY.

5Repeat steps 1 through 4 for each component you want to control with the remote control.

Searching for the component code

If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code:

1On the remote control, press CBL/SAT button or DVD/VCR button once.

2Press and hold SETUP until the red light blinks twice, then release SETUP.

3Press the number buttons 9, 9,1. The red light blinks twice.

4Aim the remote control at the set-top-box or the VCR or DVD and slowly alternate between pressing PWR and the component (CBL/SAT or DVD/VCR) button. Stop when the component turns off.

NOTE: In the search mode, the remote control sends codes from its library to the selected device, starting with the most popular code first.

5Press SETUP once to lock in the code.

Using the TV 53

Image 57
Contents HP PE4240n 42 Plasma Television User’s Guide USA Table of Contents Troubleshooting Specifications Installing the TV SafetyFirst Opening the packagePrecautions Cleaning the TV Preventing Image Retention Wall Mounting or Stand ReplacementWhat is in the Box FeaturesIntroduction Page Overview Identifying front panel controls and indicatorsIdentifying the remote control buttons MTS AV, COMP, DVI/VGA, TV Rear view/terminal board Introduction Identifying connectorsProtection Attaching and Connecting Optional External Speakers Set UpAttaching the speakers to the TV Connecting the speakers to the TV Connecting an antenna or cable directly to the TV Connecting an Antenna or Cable TVConnecting a digital TV DTV receiver to the TV Connecting a set-top-box to the TVPage Connecting a Composite Video Source Connecting an S-Video Source Connecting a Component Source Using the HP Mcpc with the TV remote control Connecting the HP Media Center PCDVI/VGA TV remote HP Mcpc button Button FunctionHP.PC HP.MCInstalling or Replacing Remote Control Batteries Front Panel Buttons Using the TVBasic Operations Turning on the TVTurning off the TV Using the PIP/POP Adjusting volumeSelecting the input source Muting soundSelecting the screen aspect Using the sleep timer to turn off the TVSwapping the PIP/POP with the main screen image Image area Ratio DescriptionUsing the On Screen Display OSD Controls Using the OSD menus Picture menu Function Default ResetDisplay menu Function Default Reset Function Default Reset Menu Sound menu Function Default ResetInformation menu Function Default Reset Configuration Function Default Reset MenuTV Setup menu Function Default Reset Changing the OSD Settings Setting up TV channels Auto ScanRun auto scan Page Add or delete a channel Set up favorite channel Fine tuning a channel Mapping channels Page How to adjust the main picture Adjusting the pictureHow to automatically adjust the picture for VGA input Setting up the PIP/POPAdjusting sound settings Selecting SAP Selecting the speaker sourceUsing the screen washing feature Selecting Auto Off mode Changing the V Chip settings Setting up V ChipPage Changing the V Chip PIN Page Using closed caption Selecting color system Setting up VGAUsing the Remote Control Programming the remote control for component control Programming the component codeSearching for the component code Checking the component code Reassigning component buttonsTo assign Use this sequence Changing volume lock Troubleshooting the remote control programmingProblem Solution Manufacturer’s codes Manufacturer Codes for VCRCCE JVC HI-QKEC KLHSTS RCATMK Manufacturer Codes for cable converter box ABCNSC Popular Mechanics 0400 Proscan 0021 Pulsar 0000 Quasar HTS Manufacturer Codes for satellite or DBS receiversManufacturer Codes for DVD players Symptom Checks Remedy TroubleshootingOperate the external device or computer move Signals SpecificationsPicture Input terminalsPin VGA Signal analog Number Connector SpecificationsPin DVI-D Signal digital Number Pin assignments and signals for DVI-D connectorFederal Communications Commission Notice Agency Regulatory NoticeModifications CablesHP Mcpc IndexPIP/POP Index Page Page
Related manuals
Manual 8 pages 58.48 Kb Manual 1 pages 756 b

PE4240N 42 inch specifications

The HP PE4240N is a versatile 42-inch professional display engineered to meet the needs of businesses and public spaces. Known for its robust design and high-quality performance, this display is an excellent choice for various applications, including digital signage, presentations, and interactive kiosks.

One of the standout features of the HP PE4240N is its Full HD resolution, which ensures that content is displayed with clarity and detail. With a resolution of 1920 x 1080 pixels, this display presents vivid colors and sharp images, making it ideal for showcasing announcements, advertisements, or informative content. The display is also equipped with a wide viewing angle, ensuring that images can be seen clearly from various positions in a room.

In terms of connectivity, the HP PE4240N is designed with a multitude of ports, including HDMI, VGA, and composite inputs. This allows for seamless integration with various devices, such as computers, media players, and gaming consoles. Additionally, the display supports both wired and wireless connectivity options, offering flexibility for different setups.

The HP PE4240N also features advanced display technologies that enhance the viewing experience. The use of LED backlighting allows for greater energy efficiency and improved brightness, while the anti-glare coating minimizes reflections, ensuring that content remains visible even in well-lit environments. Furthermore, its high contrast ratio contributes to deeper blacks and vivid colors, enhancing the overall image quality.

Durability is another key characteristic of the HP PE4240N. It is designed to withstand the rigors of continuous use in busy environments, making it a reliable choice for retail locations, transportation hubs, and corporate offices. The unit is built with a sturdy frame and includes features such as heat management to prevent overheating during extended operation.

Finally, the HP PE4240N is user-friendly, featuring an intuitive interface that simplifies navigation and controls. The display can be easily mounted in various configurations, whether wall-mounted or placed on a stand, making it adaptable to different spaces and needs.

In summary, the HP PE4240N 42-inch display is a high-performance solution that combines outstanding image quality, versatile connectivity options, and durability, making it an excellent choice for professional environments. With its advanced technologies and user-friendly design, it caters effectively to the demands of modern business communication and advertising.