HP FC 1GB/2GB 16B manual Interpreting Post Results, Supply

Page 33

Operating the HP Surestore FC 1Gb/2Gb Switch 16B

3

Table 3-2describes the LEDs on the power supply side of the switch.

Table 3-2

Power Supply Side LED Patterns During Normal Operation

 

 

 

 

 

Location

Purpose

Color of LED

Status of Hardware

Recommended

of LED

of LED

 

 

Action

 

 

 

 

 

On each

Indicates

No light

Power supply is not

Verify power supply is

power

status of

 

providing power.

on and power cable is

supply

related

 

 

connected to a valid

 

power

 

 

power source.

 

supply

 

 

 

 

 

 

 

 

 

 

Steady green

Power supply is providing

No action required.

 

 

 

power.

 

 

 

 

 

 

Center of

Indicates

No light

Either the switch is off, or

Verify that the switch

power

switch

 

boot is not complete, or

is on and boot has had

supply

status

 

boot has failed.

time to complete. If

side

 

 

 

there is still no light,

 

 

 

 

contact your HP

 

 

 

 

account representative.

 

 

 

 

 

 

 

Steady green

Switch is on and boot has

No action required.

 

 

 

successfully completed.

 

 

 

 

 

 

 

 

Steady yellow

Diagnostic command is in

If no diagnostic tests

 

 

 

progress, or one or more

are running, check the

 

 

 

ports are faulty.

Port Status LEDs for

 

 

 

 

fault indicators.

 

 

 

 

 

 

 

Slow-flashing

Diagnostic failure on one or

Errors may be listed in

 

 

yellow

more ports.

the error log. Refer to

 

 

 

 

the Fabric OS

 

 

 

 

Procedures Guide for

 

 

 

 

more information.

 

 

 

 

 

Interpreting POST Results

Each time the switch is powered on or reset, the switch automatically performs POST, a one minute system check during which the port status LEDs flash different colors.

To determine whether POST completed without errors, verify that all LEDs return to a normal state after POST is complete. If one or more LEDs do not return to a normal state, and this is not due to the switch being set to beacon, see Interpreting LED Activity on page 3-1(for more information about beaconing, refer to the Fabric OS Procedures Guide).

Note: If the switch prompt does not display when POST completes, POST was not successfully completed and the switch should be returned to your HP account representative for repair.

Any errors detected during POST are written to the system log, accessible through the errShow command. For more information about error messages, refer to the Fabric OS Reference.

HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide

3-5

Image 33
Contents Page Warranty Contents Glossary Index About This Guide PrefaceGetting Help Related PublicationsUse of Notes, Cautions, and Warnings Getting Software UpdatesViii Introducing the HP Surestore FC 1Gb/2Gb Switch 16BOverview SFP Media Side Monitoring and Managing the FC 16B Introducing the HP Surestore FC 1Gb/2Gb Switch 16B Installing and Configuring the HP Surestore FC 1Gb/2Gb Switch 16BSafety Guidelines Installing the Switch as a Stand-Alone Unit Package ContentsFC 16B Rack-Mounted Switch Installing the Switch in a RackPage Installing the Rear Rail-Tray Brackets HP Rack To install the switch in a rackInstalling the Tinnerman Clips HP Rack Installing the Rubber Washers Assembling the Inner Rails To configure the FC 16B and connect it to a fabric Configuring and Connecting the SwitchA Windows 95, 98, 2000, or NT environment Page Saving the System Configuration Files Backing up the Switch Configuration Settings Next Steps Setting QuickLoop Mode on PortsHP Surestore VA Private Loop Devices Operating the HP Surestore FC 1Gb/2Gb Switch 16B Turning the FC 16B On and OffInterpreting LED Activity LEDs On the SFP Media Side Above LEDs On the Power Supply Side Supply Interpreting Post ResultsDiagnostic Tests Maintaining the SwitchField-Replaceable Units FRUs Operating the HP Surestore FC 1Gb/2Gb Switch 16B Switch Components Product SpecificationsDimension Value Weight and Physical DimensionsFacility Requirements Table A-1Environmental Requirements Power Supply SpecificationsGeneral Specifications Specification DescriptionTable A-4 Memory Specifications Optical Port SpecificationsSerial Port Specifications Post Specifications Signal DescriptionPIN FCC EMC Statement USA EMC Statement Canada Regulatory ComplianceCertification and Classification Information Product Information Declaration of Conformity Glossary BER Credit Cut-through Data Word Defined Zone ConfigurationBlock BroadcastEdtov DLSFlogi FC-AL-3 FC-FLA FCP FC-PH-1, 2, 3 FC-PI FC-PLDA FC-SW-2FRU FSPGbic FspfHBA IODLIP Lmtov JbodLpsm LWL MIBPost PlogiRAID RatovRrtov RscnSnmp SNSSWL WWN UDP ULP UlptovEMI IndexNvram A-2 Index-3 Index-4

FC 1GB/2GB 16B specifications

The HP FC 1GB/2GB 16B is a Fibre Channel adapter that plays a vital role in high-performance storage networks, particularly in enterprise environments where data transfer speed and reliability are critical. Designed for scalability and efficiency, this adapter supports both 1GB and 2GB data rates, making it suitable for a variety of applications ranging from small businesses to large data centers.

One of the main features of the HP FC 1GB/2GB 16B is its ability to deliver robust performance with low latency, enabling quick access and retrieval of data. This is essential in environments that require real-time data processing and immediate availability. The adapter comes with dual ports which allow for multiple connections to the storage area network (SAN), enhancing redundancy and providing path failover capabilities to minimize downtime.

In terms of technology, the HP FC 1GB/2GB 16B utilizes advanced Fibre Channel protocols that ensure uninterrupted data flow and high bandwidth utilization. With support for SCSI commands over Fibre Channel, the adapter facilitates seamless integration between storage devices and servers, thus optimizing data exchanges. Additionally, the auto-sensing capability of the adapter allows it to automatically adjust its speed based on the requirements of the storage network, providing optimal performance while minimizing configuration hassles.

The characteristics of the HP FC 1GB/2GB 16B further strengthen its position as a reliable component for SANs. It features low power consumption design, which not only reduces operational costs but also contributes to a greener IT environment. The adapter is built to withstand the rigors of continuous operation, ensuring longevity and reliability. Its compact design also means it can fit into a variety of server chassis, making it flexible and easy to deploy.

Security is another critical aspect of the HP FC 1GB/2GB 16B that cannot be overlooked. The adapter includes features for port security and zoning, providing mechanisms to control data access and protect sensitive information. Its compatibility with various HP servers adds to its appeal, allowing organizations to leverage their existing infrastructure while upgrading their connectivity capabilities.

In conclusion, the HP FC 1GB/2GB 16B Fibre Channel adapter stands out due to its high performance, reliability, and scalability. It caters to diverse storage networking needs within enterprise environments, making it a worthwhile investment for organizations looking to enhance their data management and connectivity solutions.