HP FC 1GB/2GB 16B manual Saving the System Configuration Files

Page 24

2

Installing and Configuring the HP Surestore FC 1Gb/2Gb Switch 16B

7.Add the SFPs (small form factor pluggable media) and cables to the ports as required by completing the following steps:

Note The ports and FC cables used in trunking groups must meet specific requirements. For a list of these requirements, refer to the ISL Trunking User’s Guide.

CAUTION Configure each port to match the topology of each host or target before connecting to the device. The default port configuration is fabric, not private loop. The switch does not auto-sense topology.

a.Remove the shipping plug from the ports to be used.

b.Position the SFP so that the key (the tab near the cable-end of the SFP) is on top, and insert the SFP into the port until it is firmly seated and the latching mechanism clicks. For more specific instructions, refer to the SFP manufacturer’s documentation.

Note The SFP is keyed so that it can only be inserted with the correct orientation into the port. If the SFP does not slide in easily, ensure it is correctly oriented.

c.Connect the cables to the SFPs as appropriate to the fabric topology. Position each cable so that the key (the ridge on one side of the cable connector) is aligned with the slot in the SFP. Then, insert the cable into the SFP until it is firmly seated and the latching mechanism clicks.

Note The cable is keyed so that it can only be inserted correctly into the SFP. If the cable does not slide in easily, ensure it is correctly oriented.

8.Optional: Verify the correct operation of the FC 16B by entering the following command

from a workstation: switchShow. This command provides information about the status of the switch and the ports. For more information about this and other commands, refer to the Fabric OS Procedures Guide.

Saving the System Configuration Files

Upload the switch configuration file for disaster recovery and keep it in a safe place where it can be easily found. Backing up the configuration after the initial configuration changes and periodically thereafter is strongly recommended.

2-12

HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Page Warranty Contents Glossary Index Preface About This GuideRelated Publications Getting HelpGetting Software Updates Use of Notes, Cautions, and WarningsViii Introducing the HP Surestore FC 1Gb/2Gb Switch 16BOverview SFP Media Side Monitoring and Managing the FC 16B Introducing the HP Surestore FC 1Gb/2Gb Switch 16B Installing and Configuring the HP Surestore FC 1Gb/2Gb Switch 16BSafety Guidelines Package Contents Installing the Switch as a Stand-Alone UnitInstalling the Switch in a Rack FC 16B Rack-Mounted SwitchPage To install the switch in a rack Installing the Rear Rail-Tray Brackets HP RackInstalling the Tinnerman Clips HP Rack Installing the Rubber Washers Assembling the Inner Rails Configuring and Connecting the Switch To configure the FC 16B and connect it to a fabricA Windows 95, 98, 2000, or NT environment Page Saving the System Configuration Files Backing up the Switch Configuration Settings Setting QuickLoop Mode on Ports Next StepsHP Surestore VA Private Loop Devices Operating the HP Surestore FC 1Gb/2Gb Switch 16B Turning the FC 16B On and OffInterpreting LED Activity LEDs On the SFP Media Side Above LEDs On the Power Supply Side Interpreting Post Results SupplyMaintaining the Switch Diagnostic TestsField-Replaceable Units FRUs Operating the HP Surestore FC 1Gb/2Gb Switch 16B Product Specifications Switch ComponentsWeight and Physical Dimensions Dimension ValueFacility Requirements Table A-1Power Supply Specifications Environmental RequirementsGeneral Specifications Specification DescriptionTable A-4 Memory Specifications Optical Port SpecificationsSerial Port Specifications Post Specifications Signal DescriptionPIN Regulatory Compliance FCC EMC Statement USA EMC Statement CanadaCertification and Classification Information Product Information Declaration of Conformity Glossary Credit Cut-through Data Word Defined Zone Configuration BERBlock BroadcastDLS EdtovFC-AL-3 FC-FLA FCP FC-PH-1, 2, 3 FC-PI FC-PLDA FC-SW-2 FlogiFRU FSPFspf GbicHBA IODJbod LIP LmtovLpsm LWL MIBPlogi PostRatov RAIDRrtov RscnSnmp SNSSWL UDP ULP Ulptov WWNIndex EMINvram A-2 Index-3 Index-4

FC 1GB/2GB 16B specifications

The HP FC 1GB/2GB 16B is a Fibre Channel adapter that plays a vital role in high-performance storage networks, particularly in enterprise environments where data transfer speed and reliability are critical. Designed for scalability and efficiency, this adapter supports both 1GB and 2GB data rates, making it suitable for a variety of applications ranging from small businesses to large data centers.

One of the main features of the HP FC 1GB/2GB 16B is its ability to deliver robust performance with low latency, enabling quick access and retrieval of data. This is essential in environments that require real-time data processing and immediate availability. The adapter comes with dual ports which allow for multiple connections to the storage area network (SAN), enhancing redundancy and providing path failover capabilities to minimize downtime.

In terms of technology, the HP FC 1GB/2GB 16B utilizes advanced Fibre Channel protocols that ensure uninterrupted data flow and high bandwidth utilization. With support for SCSI commands over Fibre Channel, the adapter facilitates seamless integration between storage devices and servers, thus optimizing data exchanges. Additionally, the auto-sensing capability of the adapter allows it to automatically adjust its speed based on the requirements of the storage network, providing optimal performance while minimizing configuration hassles.

The characteristics of the HP FC 1GB/2GB 16B further strengthen its position as a reliable component for SANs. It features low power consumption design, which not only reduces operational costs but also contributes to a greener IT environment. The adapter is built to withstand the rigors of continuous operation, ensuring longevity and reliability. Its compact design also means it can fit into a variety of server chassis, making it flexible and easy to deploy.

Security is another critical aspect of the HP FC 1GB/2GB 16B that cannot be overlooked. The adapter includes features for port security and zoning, providing mechanisms to control data access and protect sensitive information. Its compatibility with various HP servers adds to its appeal, allowing organizations to leverage their existing infrastructure while upgrading their connectivity capabilities.

In conclusion, the HP FC 1GB/2GB 16B Fibre Channel adapter stands out due to its high performance, reliability, and scalability. It caters to diverse storage networking needs within enterprise environments, making it a worthwhile investment for organizations looking to enhance their data management and connectivity solutions.
Top Page Image Contents