HP FC 1GB/2GB 16B manual Fspf, Gbic, Hba, Iod, Isl

Page 51

FSPF

Fabric Shortest Path First. Routing protocol for Fibre Channel switches.

Full-duplex

A mode of communication that allows the same port to simultaneously transmit

 

and receive frames. See also Half-duplex.

Fx_Port

A fabric port that can operate as either an F_Port or FL_Port. See also F_Port,

 

FL_Port.

G_Port

Generic Port; a port that can operate as either an E_Port or F_Port. A port is

 

defined as a G_Port when it is not yet connected or has not yet assumed a specific

 

function in the fabric.

GBIC

Gbps

GBps Half-duplex

Gigabit Interface Converter; a removable serial transceiver module that allows gigabaud physical-level transport for Fibre Channel and gigabit Ethernet. See also SFP.

Gigabits per second (1,062,500,000 bits/second).

GigaBytes per second (1,062,500,000 bytes/second).

A mode of communication that allows a port to either transmit or receive frames at any time, but not simultaneously (with the exception of link control frames, which can be transmitted at any time). See also Full-duplex.

Hard Address

The AL_PA that an NL_Port attempts to acquire during loop initialization.

HBA

Host Bus Adapter; the interface card between a server or workstation bus and the

 

Fibre Channel network.

Hub

A Fibre Channel wiring concentrator that collapses a loop topology into a

 

physical star topology. Nodes are automatically added to the loop when active and

 

removed when inactive.

Idle

Continuous transmission of an ordered set over a Fibre Channel link when no data

 

is being transmitted, to keep the link active and maintain bit, byte, and word

 

synchronization.

Initiator

A server or workstation on a Fibre Channel network that initiates communications

 

with storage devices. See also Target.

Integrated

The fabric created by the HP FC 6164, consisting of six Silkworm 2250 switches

Fabric

cabled together and configured to handle traffic as a seamless group.

IOD

In-order Delivery; a parameter that, when set, guarantees that frames are either

 

delivered in order or dropped.

ISL

ISL Trunking

Interswitch Link; a Fibre Channel link from the E_Port of one switch to the E_Port of another. See also E_Port, Cascade.

An HP Brocade switch feature that enables distribution of traffic over the combined bandwidth of up to four ISLs (between adjacent switches), while preserving in-order delivery. A set of trunked ISLs is called a trunking group; each port employed in a trunking group is called a trunking port. See also Master Port.

Isolated E_Port

IU

An E_Port that is online but not operational due to overlapping domain IDs or nonidentical parameters (such as E_D_TOVs). See also E_Port.

Information Unit; a set of information as defined by either upper-level process protocol definition or upper-level protocol mapping.

HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide

Glossary-5

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Page Warranty Contents Glossary Index About This Guide PrefaceGetting Help Related PublicationsUse of Notes, Cautions, and Warnings Getting Software UpdatesViii Introducing the HP Surestore FC 1Gb/2Gb Switch 16BOverview SFP Media Side Monitoring and Managing the FC 16B Introducing the HP Surestore FC 1Gb/2Gb Switch 16B Installing and Configuring the HP Surestore FC 1Gb/2Gb Switch 16BSafety Guidelines Installing the Switch as a Stand-Alone Unit Package ContentsFC 16B Rack-Mounted Switch Installing the Switch in a RackPage Installing the Rear Rail-Tray Brackets HP Rack To install the switch in a rackInstalling the Tinnerman Clips HP Rack Installing the Rubber Washers Assembling the Inner Rails To configure the FC 16B and connect it to a fabric Configuring and Connecting the SwitchA Windows 95, 98, 2000, or NT environment Page Saving the System Configuration Files Backing up the Switch Configuration Settings Next Steps Setting QuickLoop Mode on PortsHP Surestore VA Private Loop Devices Operating the HP Surestore FC 1Gb/2Gb Switch 16B Turning the FC 16B On and OffInterpreting LED Activity LEDs On the SFP Media Side Above LEDs On the Power Supply Side Supply Interpreting Post ResultsDiagnostic Tests Maintaining the SwitchField-Replaceable Units FRUs Operating the HP Surestore FC 1Gb/2Gb Switch 16B Switch Components Product SpecificationsTable A-1 Weight and Physical DimensionsDimension Value Facility RequirementsEnvironmental Requirements Power Supply SpecificationsGeneral Specifications Specification DescriptionTable A-4 Memory Specifications Optical Port SpecificationsSerial Port Specifications Post Specifications Signal DescriptionPIN FCC EMC Statement USA EMC Statement Canada Regulatory ComplianceCertification and Classification Information Product Information Declaration of Conformity Glossary Broadcast Credit Cut-through Data Word Defined Zone ConfigurationBER BlockEdtov DLSFSP FC-AL-3 FC-FLA FCP FC-PH-1, 2, 3 FC-PI FC-PLDA FC-SW-2Flogi FRUIOD FspfGbic HBAMIB JbodLIP Lmtov Lpsm LWLPost PlogiRscn RatovRAID RrtovSnmp SNSSWL WWN UDP ULP UlptovEMI IndexNvram A-2 Index-3 Index-4

FC 1GB/2GB 16B specifications

The HP FC 1GB/2GB 16B is a Fibre Channel adapter that plays a vital role in high-performance storage networks, particularly in enterprise environments where data transfer speed and reliability are critical. Designed for scalability and efficiency, this adapter supports both 1GB and 2GB data rates, making it suitable for a variety of applications ranging from small businesses to large data centers.

One of the main features of the HP FC 1GB/2GB 16B is its ability to deliver robust performance with low latency, enabling quick access and retrieval of data. This is essential in environments that require real-time data processing and immediate availability. The adapter comes with dual ports which allow for multiple connections to the storage area network (SAN), enhancing redundancy and providing path failover capabilities to minimize downtime.

In terms of technology, the HP FC 1GB/2GB 16B utilizes advanced Fibre Channel protocols that ensure uninterrupted data flow and high bandwidth utilization. With support for SCSI commands over Fibre Channel, the adapter facilitates seamless integration between storage devices and servers, thus optimizing data exchanges. Additionally, the auto-sensing capability of the adapter allows it to automatically adjust its speed based on the requirements of the storage network, providing optimal performance while minimizing configuration hassles.

The characteristics of the HP FC 1GB/2GB 16B further strengthen its position as a reliable component for SANs. It features low power consumption design, which not only reduces operational costs but also contributes to a greener IT environment. The adapter is built to withstand the rigors of continuous operation, ensuring longevity and reliability. Its compact design also means it can fit into a variety of server chassis, making it flexible and easy to deploy.

Security is another critical aspect of the HP FC 1GB/2GB 16B that cannot be overlooked. The adapter includes features for port security and zoning, providing mechanisms to control data access and protect sensitive information. Its compatibility with various HP servers adds to its appeal, allowing organizations to leverage their existing infrastructure while upgrading their connectivity capabilities.

In conclusion, the HP FC 1GB/2GB 16B Fibre Channel adapter stands out due to its high performance, reliability, and scalability. It caters to diverse storage networking needs within enterprise environments, making it a worthwhile investment for organizations looking to enhance their data management and connectivity solutions.
Top Page Image Contents