HP FC 1GB/2GB 16B manual FC-AL-3 FC-FLA FCP FC-PH-1, 2, 3 FC-PI FC-PLDA FC-SW-2, Flogi, Fru, Fsp

Page 50

Fabric

Manager

Fabric Name

Fabric OS Fabric Watch

FC-AL-3

FC-FLA

FCP

FC-PH-1, 2, 3 FC-PI FC-PLDA

FC-SW-2

A software product that works in conjunction with Web Tools to provide a graphical user interface for managing switch groups as a single unit, instead of as separate switches. Fabric Manager is installed on and run from a computer workstation.

The unique identifier assigned to a fabric and communicated during login and port discovery.

Operating system on HP Brocade switches.

A software product that runs on Fabric OS and allows monitoring and configuration of fabric and switch elements.

The Fibre Channel Arbitrated Loop standard defined by ANSI. Defined on top of the FC-PH standards.

The Fibre Channel Fabric Loop Attach standard defined by ANSI.

Fibre Channel Protocol; mapping of protocols onto the Fibre Channel standard protocols. For example, SCSI FCP maps SCSI-3 onto Fibre Channel.

The Fibre Channel Physical and Signalling Interface standards defined by ANSI.

The Fibre Channel Physical Interface standard defined by ANSI.

The Fibre Channel Private Loop Direct Attach standard defined by ANSI. Applies to the operation of peripheral devices on a private loop.

The second generation of the Fibre Channel Switch Fabric standard defined by ANSI. Specifies tools and algorithms for the interconnection and initialization of Fibre Channel switches in order to create a multi-switch Fibre Channel fabric.

Fibre Channel Transport

Fill Word

A protocol service that supports communication between Fibre Channel service providers. See also FSP.

An IDLE or ARB ordered set that is transmitted during breaks between data frames to keep the Fibre Channel link active.

Firmware FL_Port

The basic operating system provided with the hardware.

Fabric Loop Port; a port that is able to transmit under fabric protocol and also has arbitrated loop capabilities. Can be used to connect an NL_Port to a switch. See also F_Port, Fx_Port.

FLOGI

Frame

Fabric Login; the process by which an N_Port determines whether a fabric is present, and if so, exchanges service parameters with it. See also PLOGI.

The Fibre Channel structure used to transmit data between ports. Consists of a start-of-frame delimiter, header, any optional headers, the data payload, a cyclic redundancy check (CRC), and an end-of-frame delimiter. There are two types of frames: Link control frames (transmission acknowledgements, etc.) and data frames.

FRU

FS

Field-replaceable Unit; a component that can be replaced on site.

Fibre Channel Service; a service that is defined by Fibre Channel standards and exists at a well-known address. For example, the Simple Name Server is a Fibre Channel service. See also FSP.

FSP

Fibre Channel Service Protocol; the common protocol for all fabric services,

 

transparent to the fabric type or topology. See also FS.

Glossary-4

HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Page Warranty Contents Glossary Index Preface About This GuideRelated Publications Getting HelpGetting Software Updates Use of Notes, Cautions, and WarningsViii Overview Introducing the HP Surestore FC 1Gb/2GbSwitch 16B SFP Media Side Monitoring and Managing the FC 16B Introducing the HP Surestore FC 1Gb/2Gb Switch 16B Safety Guidelines Installing and Configuring the HP SurestoreFC 1Gb/2Gb Switch 16B Package Contents Installing the Switch as a Stand-Alone UnitInstalling the Switch in a Rack FC 16B Rack-Mounted SwitchPage To install the switch in a rack Installing the Rear Rail-Tray Brackets HP RackInstalling the Tinnerman Clips HP Rack Installing the Rubber Washers Assembling the Inner Rails Configuring and Connecting the Switch To configure the FC 16B and connect it to a fabricA Windows 95, 98, 2000, or NT environment Page Saving the System Configuration Files Backing up the Switch Configuration Settings Setting QuickLoop Mode on Ports Next StepsHP Surestore VA Private Loop Devices Interpreting LED Activity Operating the HP Surestore FC 1Gb/2Gb Switch 16BTurning the FC 16B On and Off LEDs On the SFP Media Side Above LEDs On the Power Supply Side Interpreting Post Results SupplyMaintaining the Switch Diagnostic TestsField-Replaceable Units FRUs Operating the HP Surestore FC 1Gb/2Gb Switch 16B Product Specifications Switch ComponentsFacility Requirements Weight and Physical DimensionsDimension Value Table A-1Power Supply Specifications Environmental RequirementsTable A-4 General SpecificationsSpecification Description Serial Port Specifications Memory SpecificationsOptical Port Specifications PIN Post SpecificationsSignal Description Regulatory Compliance FCC EMC Statement USA EMC Statement CanadaCertification and Classification Information Product Information Declaration of Conformity Glossary Block Credit Cut-through Data Word Defined Zone ConfigurationBER BroadcastDLS EdtovFRU FC-AL-3 FC-FLA FCP FC-PH-1, 2, 3 FC-PI FC-PLDA FC-SW-2Flogi FSPHBA FspfGbic IODLpsm LWL JbodLIP Lmtov MIBPlogi PostRrtov RatovRAID RscnSWL SnmpSNS UDP ULP Ulptov WWNIndex EMINvram A-2 Index-3 Index-4

FC 1GB/2GB 16B specifications

The HP FC 1GB/2GB 16B is a Fibre Channel adapter that plays a vital role in high-performance storage networks, particularly in enterprise environments where data transfer speed and reliability are critical. Designed for scalability and efficiency, this adapter supports both 1GB and 2GB data rates, making it suitable for a variety of applications ranging from small businesses to large data centers.

One of the main features of the HP FC 1GB/2GB 16B is its ability to deliver robust performance with low latency, enabling quick access and retrieval of data. This is essential in environments that require real-time data processing and immediate availability. The adapter comes with dual ports which allow for multiple connections to the storage area network (SAN), enhancing redundancy and providing path failover capabilities to minimize downtime.

In terms of technology, the HP FC 1GB/2GB 16B utilizes advanced Fibre Channel protocols that ensure uninterrupted data flow and high bandwidth utilization. With support for SCSI commands over Fibre Channel, the adapter facilitates seamless integration between storage devices and servers, thus optimizing data exchanges. Additionally, the auto-sensing capability of the adapter allows it to automatically adjust its speed based on the requirements of the storage network, providing optimal performance while minimizing configuration hassles.

The characteristics of the HP FC 1GB/2GB 16B further strengthen its position as a reliable component for SANs. It features low power consumption design, which not only reduces operational costs but also contributes to a greener IT environment. The adapter is built to withstand the rigors of continuous operation, ensuring longevity and reliability. Its compact design also means it can fit into a variety of server chassis, making it flexible and easy to deploy.

Security is another critical aspect of the HP FC 1GB/2GB 16B that cannot be overlooked. The adapter includes features for port security and zoning, providing mechanisms to control data access and protect sensitive information. Its compatibility with various HP servers adds to its appeal, allowing organizations to leverage their existing infrastructure while upgrading their connectivity capabilities.

In conclusion, the HP FC 1GB/2GB 16B Fibre Channel adapter stands out due to its high performance, reliability, and scalability. It caters to diverse storage networking needs within enterprise environments, making it a worthwhile investment for organizations looking to enhance their data management and connectivity solutions.
Top Page Image Contents