HP FC 1GB/2GB 16B manual Weight and Physical Dimensions, Facility Requirements, Table A-1

Page 38

A

Product Specifications

•Two fan trays, each containing two fans. Air is pulled in through the rear intake and pushed out through the vents in the SFP media side. The fans provide adequate cooling for the maximum switch power rating of 102 Watts.

•Three digital thermometers, capable of sensing a temperature range from -55 °C to +125°C, in 0.5°C increments.

•A motherboard that is completely enclosed in an EMI (electromagnetic interference) enclosure tray. The logic and chassis ground are connected to the chassis by screws. The embedded processor can process frames up to 1024 bytes.

•A real-time clock (RTC) with a 10-year, non-customer replaceable, battery and 56 bytes of

NVRAM.

Weight and Physical Dimensions

The dimensions of the FC 16B are listed in the following table.

Table A-1

Physical Specifications

 

 

 

Dimension

 

Value

 

 

 

Height

 

1U

 

 

 

Depth

 

24 inches (61.0 cm)

 

 

 

Width

 

17 inches (43.2 cm)

 

 

Weight (with both power

28.5 lbs (12.9 kg)

supplies installed)

 

 

 

 

Facility Requirements

To ensure correct operation of the switch, the facility where the switch is in use must meet the following requirements:

•Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the switch nameplate.

•An air flow of at least 300 cubic feet per minute, available in the immediate vicinity of the switch.

•The power specifications listed in Table A-2 on page A-3.

•The environmental specifications listed in Table A-3 on page A-3.

•The electrical interference must be less than the levels stated in the standards listed in Table A-4,under “Immunity” (on page A-5).

•If the switch will be installed in an EIA rack:

•All equipment installed in the rack should have a reliable branch circuit ground connection, and should not rely on a connection to a branch circuit, such as a power strip.

•The rack should be balanced and the installed equipment within the rack’s weight limits. Ensure the rack is mechanically secured to insure stability in the event of an earthquake.

A-2

HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Page Warranty Contents Glossary Index Preface About This GuideRelated Publications Getting HelpGetting Software Updates Use of Notes, Cautions, and WarningsViii Overview Introducing the HP Surestore FC 1Gb/2GbSwitch 16B SFP Media Side Monitoring and Managing the FC 16B Introducing the HP Surestore FC 1Gb/2Gb Switch 16B Safety Guidelines Installing and Configuring the HP SurestoreFC 1Gb/2Gb Switch 16B Package Contents Installing the Switch as a Stand-Alone UnitInstalling the Switch in a Rack FC 16B Rack-Mounted SwitchPage To install the switch in a rack Installing the Rear Rail-Tray Brackets HP RackInstalling the Tinnerman Clips HP Rack Installing the Rubber Washers Assembling the Inner Rails Configuring and Connecting the Switch To configure the FC 16B and connect it to a fabricA Windows 95, 98, 2000, or NT environment Page Saving the System Configuration Files Backing up the Switch Configuration Settings Setting QuickLoop Mode on Ports Next StepsHP Surestore VA Private Loop Devices Interpreting LED Activity Operating the HP Surestore FC 1Gb/2Gb Switch 16BTurning the FC 16B On and Off LEDs On the SFP Media Side Above LEDs On the Power Supply Side Interpreting Post Results SupplyMaintaining the Switch Diagnostic TestsField-Replaceable Units FRUs Operating the HP Surestore FC 1Gb/2Gb Switch 16B Product Specifications Switch ComponentsFacility Requirements Weight and Physical DimensionsDimension Value Table A-1Power Supply Specifications Environmental RequirementsTable A-4 General SpecificationsSpecification Description Serial Port Specifications Memory SpecificationsOptical Port Specifications PIN Post SpecificationsSignal Description Regulatory Compliance FCC EMC Statement USA EMC Statement CanadaCertification and Classification Information Product Information Declaration of Conformity Glossary Block Credit Cut-through Data Word Defined Zone ConfigurationBER BroadcastDLS EdtovFRU FC-AL-3 FC-FLA FCP FC-PH-1, 2, 3 FC-PI FC-PLDA FC-SW-2Flogi FSPHBA FspfGbic IODLpsm LWL JbodLIP Lmtov MIBPlogi PostRrtov RatovRAID RscnSWL SnmpSNS UDP ULP Ulptov WWNIndex EMINvram A-2 Index-3 Index-4

FC 1GB/2GB 16B specifications

The HP FC 1GB/2GB 16B is a Fibre Channel adapter that plays a vital role in high-performance storage networks, particularly in enterprise environments where data transfer speed and reliability are critical. Designed for scalability and efficiency, this adapter supports both 1GB and 2GB data rates, making it suitable for a variety of applications ranging from small businesses to large data centers.

One of the main features of the HP FC 1GB/2GB 16B is its ability to deliver robust performance with low latency, enabling quick access and retrieval of data. This is essential in environments that require real-time data processing and immediate availability. The adapter comes with dual ports which allow for multiple connections to the storage area network (SAN), enhancing redundancy and providing path failover capabilities to minimize downtime.

In terms of technology, the HP FC 1GB/2GB 16B utilizes advanced Fibre Channel protocols that ensure uninterrupted data flow and high bandwidth utilization. With support for SCSI commands over Fibre Channel, the adapter facilitates seamless integration between storage devices and servers, thus optimizing data exchanges. Additionally, the auto-sensing capability of the adapter allows it to automatically adjust its speed based on the requirements of the storage network, providing optimal performance while minimizing configuration hassles.

The characteristics of the HP FC 1GB/2GB 16B further strengthen its position as a reliable component for SANs. It features low power consumption design, which not only reduces operational costs but also contributes to a greener IT environment. The adapter is built to withstand the rigors of continuous operation, ensuring longevity and reliability. Its compact design also means it can fit into a variety of server chassis, making it flexible and easy to deploy.

Security is another critical aspect of the HP FC 1GB/2GB 16B that cannot be overlooked. The adapter includes features for port security and zoning, providing mechanisms to control data access and protect sensitive information. Its compatibility with various HP servers adds to its appeal, allowing organizations to leverage their existing infrastructure while upgrading their connectivity capabilities.

In conclusion, the HP FC 1GB/2GB 16B Fibre Channel adapter stands out due to its high performance, reliability, and scalability. It caters to diverse storage networking needs within enterprise environments, making it a worthwhile investment for organizations looking to enhance their data management and connectivity solutions.
Top Page Image Contents