Configuring HP WebQoS
Modifying Configuration Files Before Start-Up
The number of deferred sessions that have the same deferral time allocated to them. Minimum deferral time is 10 seconds; maximum is 120 seconds.
For example, if you set this parameter to 1 and two requests arrive at the same time, the first deferred session is allocated a deferral time of 10 seconds and the second deferred session is allocated a deferral time of 11 seconds. If you set the parameter to 2 and two requests arrive at the same time, the first deferred session is allocated a deferral time of 10 seconds and the second also is allocated a deferral time of 10 seconds.
SCA Parameters
The following parameters affect the SCA only. If you change any of these parameters, you must restart the SCA.
•LogInterval - Default: 30 minutes
How often, in minutes, WebQoS logs measurements to a measurement log file located in the directory
/var/opt/webqos/measures. The LogOn parameter must be enabled (set to 1) before WebQoS logs measurements to the log file. The minimum value is 1 minute.
•LogOn - Default: 0 (disabled)
Enable or disable measurement logging. To enable measurement logging, set this parameter to 1. To disable measurement logging, set this parameter to 0.
WebQoS creates a new measurement log file daily for each WebQoS site and places it in the directory /var/opt/webqos/measures. The measurement log file name is the site name you entered in the management user interface followed by the date. The log file contains performance measurements collected during the day for the site.
The measurements logged include:
—Average response time for each request class
—Number of new, redirected, deferred, and rejected sessions for each request class
—Average and maximum queue lengths
•SaveFiles - Default: 0 (disabled)
Chapter 3 | 29 |