HP WebQoS Software manual Add Service Configuration Description Dialog Box

Configuring HP WebQoS

Configuring WebQoS from the Management User Interface

Figure 3-5 Add Service Configuration Description Dialog Box

2. Enter the service name in the Add Service Configuration dialog

	box. A service name can be anything that is meaningful to you as an
	administrator of WebQoS. For example, a service name could be
	“BigCompany.” The “BigCompany” service might contain sites such
	as: www.BigCompanyStore.com, www.BigCompanySupport.com and
	www.BigCompanyHR.com. You can use spaces in the name. (To
	configure the sites of a service, see “Adding a Site” on page 60.)
	You can view the service you configured by selecting Services from
	the Systems/Services pull down in the main management user
	interface view.
	If you select a service and choose File: Delete all the configurations for
NOTE
	sites in that service are also deleted. Any system configuration for
	that service will remain.
	3. If you wish the WebQoS SCO to generate aggregate service statistics

46 Chapter 3