Configuring HP WebQoS
Configuring WebQoS from the Management User Interface
Figure 3-19 Add Service Level Objectives Dialog Box
a.Select the SLO Type from the pull down menu in the Add Service Level Objectives dialog box (Figure
b.Enter an appropriate number (based on the SLO type) in the Number input box.
c.Select the Class from the pull down menu if appropriate.
d.Enter the appropriate SLO Priority. The SLO priority defines the relative priority across SLOs and thresholds to be maintained for the site. WebQoS performs the corrective actions that are defined for the highest priority SLO or threshold violated before taking other corrective actions. When multiple SLOs and thresholds are violated, the corrective action with the highest priority is taken. The SLOs are prioritized in ascending order (from lowest to highest) meaning a priority 1 SLO is higher in
Chapter 3 | 67 |