HP Serviceguard Extension for SAP (SGeSAP) manual Scp -p /etc/auto.direct clunode2/etc/auto.direct

vi/etc/cmcluster/MDMNFS/mdmNFS.control.script

VG[0]="vgmdmuser" LV[0]="/dev/vgmdmuser/lvmdmuser"; \ FS[0]="/export/home/mdmuser"; \ FS_MOUNT_OPT[0]=""; \ FS_UMOUNT_OPT[0]=""; \ FS_FSCK_OPT[0]=""; \ FS_TYPE[0]="vxfs" IP[0]="172.16.11.96" SUBNET[0]="172.16.11.0"

The file hanfs.sh contains NFS directories that will exported with export options. These variables are used by the command exportfs -ito export the file systems and the command exportfs -uto unexport the file systems.

vi /etc/cmcluster/MDMNFS/hanfs.sh

XFS[0]="-o root=clunode1:clunode2 /export/home/mdmuser"

All nodes of the cluster require a copy of the configuration changes. Copy the MDM NFS Serviceguard files to the second cluster node:

scp -rp /etc/cmcluster/MDMNFS clunode2:/etc/cmcluster/MDMNFS

Setup Step: MDM100

Register the Serviceguard mdmNFS package in the cluster and run it:

clunode1

cmapplyconf -P /etc/cmcluster/MDMNFS/mdmNFS.config

cmrunpkg mdmNFS

NOTE: The commands executed buy the mdmNFS package are saved in

/etc/cmcluster/MDMNFS/nfsMDM.control.script.log

After the cmrunpkg completes the "NFS export" directory /export/home/mdmuser should now be mounted on the system clunode1.

Setup Step: MDM110

Add /home/mdmuser to the automounter configuration.

The NFS exported directory will be mounted as a NFS client directory. Edit the file /etc/auto.direct and add the /home/mdmuser directory.

vi /etc/auto.direct

/home/mdmuser -vers=3,proto=udp \16.58.246.81:/export/home/mdmuser

Distribute /etc/auto.direct to all cluster members with scp.

scp -p /etc/auto.direct clunode2:/etc/auto.direct

Restart nfs subsystem on all cluster members.

/sbin/init.d/nfs.client stop

/sbin/init.d/nfs.client start

Creating an initial Serviceguard package for the MDB Component

The following steps will depend if the MDM Database will be configured as "Single" or "Multiple" MDM Serviceguard package configurations as described earlier. An "initial" Serviceguard package means that initially only the storage volumes, the file systems and the virtual IP address will be configured as a Serviceguard package. The goal is just to provide a file system for the installation of the database software. At a later step the SGeSAP specific scripts will be added to the package. Depending on the goal chose either option:

Installation and Configuration Considerations 119