HP Serviceguard Extension for SAP (SGeSAP) manual Resourcename /applications/sap/enqor/C11ascs

<pkg_name>.config. If no configuration parameters are provided with the service command, the monitors will default to the settings for a ABAP DVEBMGS Central Instance if possible.

Example entries in <pkg_name>.control.script:

SEVICE_NAME[0]="ciC11ms"

SERVICE_CMD[0]="/etc/cmcluster/C11/sapms.mon\<MS_SERVICEPORT>" SEVICE_NAME[1]="ciC11disp" SERVICE_CMD[1]="/etc/cmcluster/C11/sapdisp.mon <INSTNAME>\ <INSTNR> <hostname>"

Optional Step: OS445

In case you want to automate Replicated Enqueue handling and use follow-and-push failover semantics for[A]SCS/[A]REP packages:

For this to work with legacy packages, section 1 of the SGeSAP configuration file needs to reside in the file /etc/cmcluster/<SID>/sap.config This is the default approach even without the follow-and-push and it can always be done, also if several SGeSAP packages share this package directory. Other sections of the file can be moved to package specific files. /etc/cmcluster/<SID>/sap<packagename>.config files if required.

The SGeSAP ENQueue Operation Resource needs to be specified for each [A]SCS package and for each [A]REP replication package in the package configuration files.

Example entries for a ASCS package configuration file:

RESOURCE_NAME /applications/sap/enqor/C11ascs

RESOURCE_POLLING_INTERVAL 30

RESOURCE_START AUTOMATIC

RESOURCE_UP_VALUE != "IDLE"

Example entries for an AREP package configuration file:

RESOURCE_NAME /applications/sap/enqor/C11ascs

RESOURCE_POLLING_INTERVAL 60

RESOURCE_START AUTOMATIC

RESOURCE_UP_VALUE != "SERVING"

You will need to copy /opt/cmcluster/sap/sap.config to /etc/cmcluster if you use non-default package names. Default package names for setups with Replicated Enqueue are ascs<SID>, scs<SID> and ers<INR><SID>. Within the file, any non-default names have to be specified explicitly. If these values have to be changed during operation, the cmenqord process needs to be notified by sending it the signal USR1 via the kill command.

For SAP kernel 4.6 or 6.x and resources

/applications/sap/enqor/<SID>

/applications/sap/enqor/<SID>ascs

/applications/sap/enqor/<SID>scs

use:

ENQOR_ASCS_PKGNAME_<SID>=<non-default name_1>

ENQOR_SCS_PKGNAME_<SID>=<non-default name_2>

ENQOR_AREP_PKGNAME_<SID>=<non-default name_3>

ENQOR_REP_PKGNAME_<SID>=<non-default name_4>

Starting with SAP kernel 7.x and resources

/applications/sap/enqor/<SID>ers<instnr>

use:

ENQ_SCS_ERS<INSTNR>_PKGNAME_<SID>=<non-default name_2>

ENQ_ERS_ERS<INSTNR>_PKGNAME_<SID>=<non-default name_4>

Legacy Package Configuration 67