AMS is one way in which iLO can obtain the server name. If iLO cannot obtain the server name, the displayed server name in Insight Online and Insight RS is derived from the server serial number. If you do not install AMS, do one of the following to ensure that the server name is displayed correctly in Insight Online and Insight RS:
◦For Windows systems only, start the operating system. Insight Online and Insight RS will use the Windows computer name to identify the server.
◦Configure the Server Name on the Administration→Access Settings page in the iLO web interface.
The server name is displayed in Insight Online and Insight RS, and can be viewed by HP Support and your authorized service provider, reseller/distributor, and installer. To protect your privacy, do not use sensitive information in the name of an HP ProLiant server.
•The HP ProLiant iLO 3/4 Channel Interface Driver is installed.
This driver is installed automatically if you use the Intelligent Provisioning Recommended installation method.
For more information, see the HP iLO 4 User Guide.
11.Optional: If you want to receive email alerts about system events, configure AlertMail on the Administration→Management→AlertMail page in iLO.
For more information, see the HP iLO 4 User Guide.
Registering for Insight Remote Support central connect
Use this procedure to register an HP ProLiant server for Insight Remote Support central connect.
1.Verify that the server meets the prerequisites for using Insight Remote Support. For more information, see “Prerequisites” (page 13).
2.Select Register this server through an HP Insight Remote Support centralized hosting device. The page refreshes to show the Insight Remote Support central connect registration options.