3.Edit the setting(s) as necessary. Click Apply.
Network Settings–SNTP
•Use DHCPv4 Supplied Time Settings—Specifies whether iLO uses the DHCP server-supplied time.
•Use DHCPv6 Supplied Time Settings—Specifies whether iLO uses version 6 of the DHCP server-supplied time.
•Propagate NTP Time to Host—Specifies whether ILO uses NTP time instead of the DHCP server-supplied time.
•Primary Time Server—If DHCPv4 or DHCPv6 SNTP is not used, enter a time server address in the Primary Time Server box.
•Secondary Time Server—If DHCPv4 or DHCPv6 SNTP is not used, enter a secondary time server address in the Secondary Time Server box.
•Time Zone—A drop-down list of worldwide time zones.
To edit the settings on the SNTP tab:
1.In the iLO Configuration Utility window, click Network Settings. The General tab data appears.
2.Click the SNTP tab. The SNTP tab data appears.
Performing maintenance 63
