1.In the iLO Configuration Utility window, click Network Settings. The General tab data appears.
2.Edit the setting(s) as required. Click Apply.
Network Settings–IPv4
•Enable DHCPv4—Enables iLO to obtain its IP address (and many other settings) from a DHCP server.
◦Use DHCPv4 Supplied Gateway—Specifies whether iLO uses the DHCP server-supplied gateway. If DHCP is not used, enter a gateway address in the Gateway IPv4 Address box.
Use DHCPv4 Supplied Static Routes—Specifies whether iLO uses the DHCP server-supplied static routes. If not, enter the static route destination, mask, and gateway addresses in the Static Route #1, Static Route #2, and Static Route #3 boxes.
Use DHCPv4 Supplied Domain Name—Specifies whether iLO uses the DHCP server-supplied domain name. If DHCP is not used, enter a domain name in the Domain Name box on the Shared Network Port page.
Use DHCPv4 Supplied DNS Servers—Specifies whether iLO uses the DHCP server-supplied DNS server list. If not, enter the DNS server addresses in the Primary DNS Server, Secondary DNS Server, and Tertiary DNS Server boxes.
◦Use DHCPv4 Supplied Time Settings—Specifies whether iLO uses the DHCPv4 server-supplied time.
◦Use DHCPv4 Supplied WNS Servers—Specifies whether iLO uses the DHCP server-supplied WINS server list. If not, enter the WINS server addresses in the Primary WINS Server and Secondary WINS Server boxes.
•IPv4 Address—The iLO IP address. If DHCP is used, the iLO IP address is supplied automatically. If DHCP is not used, enter a static IP address.
60 Using Intelligent Provisioning
