HP Scripting Toolkit for Windows and Linux Performing Deployment Settings package-level actions

1.To use the deployment you just created on the server, click Deploy.

2.To use a previously created deployment, insert the USB key containing the deployment:

a.Save the deployment from the USB key to the local server.

b.In the Select a Deployment window, select the deployment from the list and click Deploy. If the USB key and their stored deployments are not displayed, click Rescan.

3.As the deployment runs, a validation screen applies settings for the following elements:

• ROM Settings

• Array Settings

• System Options

• Firmware Update

• ERS Settings

The validation screen indicates the results of the settings, using icons described in the following table.

Icon	Result
Question mark	Status unknown
Red box	Error
Gray box	Element not needed
Green check	Element successfully applied
Information icon	Click for additional information

Performing Deployment Settings package-level actions

Package-level actions manipulate the Deployment Settings package, not individual settings within a deployment.

After making a selection in the initial page, the Select a Deployment window opens.

In Select a Deployment window, existing Deployment Settings packages that are stored on the server are displayed in the left pane, existing Deployment Settings packages that are stored on an installed USB drive are displayed in the right pane, and package-level action icons are displayed

Performing maintenance 39