HP RM500SL manual Speechmap Fitting Procedures, Speechmap Technical Details, Troubleshooting

18	Speechmap Fitting Procedures		77
18.1		Section overview	77
18.2		Assessment data entry	77
18.3		Assessment data choices - 1	78
18.4		Assessment data choices - 2	79
18.5		Fitting to targets for soft speech	80
18.6		Fitting to targets for loud sounds	81
18.7		Fitting to targets for mid-level speech	82
18.8		Open fittings in Speechmap	82
18.9		FM fitting and verification	83
19	Speechmap Technical Details		84
19.1		Section overview	84
19.2		Speechmap stimuli	84
19.3		Stimulus levels	85
19.4		Microphone location effects	86
19.5		Speech signal analysis	87
20	Troubleshooting		88
20.1		Section overview	88
20.2		Self test failures	88
20.3		HIT high distortion or noise	89
20.4		HIT curves inconsistent	89
20.5		HIT curves differ from specifications	90
20.6		HIT speaker overdriven	90
20.7		No HIT reference mic. detected	90
20.8		Invalid HIT calibration	91
20.9		No REM ref. mic. detected	91
20.10		Invalid REM calibration	91
20.11		REM speaker overdriven	92
20.12		Barcode scanner malfunction	92
21	Technical Specifications		93
22	Glossary		94
23	References		98
24	Appendix 1: AudioNote 2.1 VERIFIT and RM500SL Test Signals and Analysis		101

0611 RM500SL User’s Guide Version 2.8 Page 5