HP Raining DataCorp. mvEnterprise Installation Instructions, Mkdir production, Cd /production

1.6Installation Instructions

1.To log on, type: root

This installation procedure must be performed while logged on as root. Once installed, mvEnterprise may be initiated from any UNIX login.

NOTE: Make sure root and all UNIX logins that have access to mvEnterprise have the soft file size set to unlimited. Please refer to Section 2.1

2. Insert the mvEnterprise Release 4.1 release tape in the appropriate tape drive.

3. If this is a new installation, build the base mvEnterprise directory. For example:

cd /

mkdir production

4. Change directories to the mvEnterprise directory.

cd /production

5. Load the UNIX tar section by entering the command:

		tar -xvpf tape_device_name
	where tape_device_name represents the tape drive from which
	mvEnterprise is being loaded. For example:
		/dev/rmt0.1
	Using this command installs the following programs:
consumer		Transaction Logger consumer program.
install		mvEnterprise installation program.
logger		Transaction Logger raw device
		configuration.
perror		Convert UNIX error numbers to text.
pick		mvEnterprise monitor program.
picksync		mvEnterprise disk flushing program.
pickoda		mvEnterprise ODA monitor program.

Page 10 mvEnterprise Release 4.1 on AIX Installation Guide