6.Type the Logical volume NAME. (Suggested; mvelv000, where mvelv is the mvEnterprise logical volume, 00 refers to the volume group, and 0 represents the first logical volume in that volume group.) The name, which was, entered displays.
7.Type the Number of LOGICAL PARTITIONS. This number, multiplied by the size of the logical partition, equals the size of the logical volume (as seen in the following screen). It also must be less than or equal to the maximum number of logical partitions (see Step 11).
8.Advance to the PHYSICAL VOLUME names field, and press the List key.
9.Indicate the name of the appropriate physical volume by pressing the
Select key.
10.Press the Enter key to confirm the selection.
11.Advance to the Logical volume TYPE field, type jfs (journaled file system).
Page 52 | mvEnterprise Release 4.1 on AIX | Installation Guide |