HP Raining DataCorp. mvEnterprise manual MvEnterprise Release 4.1 on AIX Installation Guide

Page 52

7.Select a disk name, and press the Select key. Press Enter to confirm the choice.

8.Press Enter to add the volume group.

9.Press Enter once more to confirm the addition of the volume group.

The Command Status window displays a message that the command was executed successfully.

Page 50

mvEnterprise Release 4.1 on AIX

Installation Guide

Page 51 Page 53
Image 52
Page 51 Page 53
Contents MvEnterprise Release 4.1.0 on AIX Raining Data CorporationPage Table of Contents MvEnterprise Release 4.1 on AIX Installation Guide Installation Instructions Installation OverviewNotation Conventions Notation ExplanationAlternate font BoldAssembly Language Manual Part Number Additional DocumentationMvEnterprise Pick License Management All licensed ports are in use Before You Install Usr/config Usr/stat Installation Instructions Mkdir productionCd /production Tar -xvpf tapedevicenameInstall -o -m Prompt Response MvEnterprise Release 4.1 on AIX Installation Guide Absrestore FilerestoreMv prodpick prodpick.reg Cp -p pickoda prodpickEnter number of phantoms for restore, CR for none SYSTEM-UPGRADEMvEnterprise Release 4.1 on AIX Installation Guide Upgrade File Listing Account FileMvEnterprise Install Program How many mvEnterprise terminals?Enter initial data base names When done, type end Enter the name to be used for the mvEnterprise program?Cshrc Login Abs Support ScriptsKillpick Installation Options MmailaddrMvEnterprise Monitor Program #prodpick -istacked.dataFlow y -X-on/off flow control default No flow control passed to program asData Input flow control onlyMvEnterprise Release 4.1 on AIX Installation Guide Current VFS = 48 Map = 1 Sequence = Adjusted lines = Current VFS = 36 Map = 1 Sequence = Adjusted lines =Prodpick Set the coldstart flag. Implied by options -a, or -f MvEnterprise Disk Flushing Program MvEnterprise Release 4.1 on AIX Installation Guide MvEnterprise Release 4.1 on AIX Installation Guide Extending Disk Space Prodpick -l0 -eProdpick -l0 PhantomsUsers MvEnterprise Line Printer Driver Program Select Add Print QueueMvEnterprise Release 4.1 on AIX Installation Guide MvEnterprise Release 4.1 on AIX Installation Guide MvEnterprise Release 4.1 on AIX Installation Guide Select Change/Show Printer Characteristics Select Default Print Job AttributesProdpick.lj3pcl.99 Prodpick.lpd prodpick.lj3pcl.99 lj3pcl 10 -r & whereProdpick -l99 -oh -t/dev/prodpick.lj3pcl.99 Startptr 0,0,0,S99Startptr Configure the System for mvEnterprise on AIX Getting StartedSet -o emacs Set -oConfigure Tape Devices for mvEnterprise on AIX Select Tape Drive. The Tape Drive screen displays Special Considerations for 4mm DAT Units Special Considerations for Quarter-Inch Cartridge Tape UnitsMvEnterprise Release 4.1 on AIX Installation Guide Update the config.tape file Further Configuration Information For All Tape DevicesDev/rmt1.1 Configure Disks for mvEnterprise on AIX Volume Group name. Type mvevg00 MvEnterprise Release 4.1 on AIX Installation Guide Create a Logical Volume to Store mvEnterprise Data Select key Page Create a File System to Store mvEnterprise Data Select File Systems. The File Systems menu displaysSelect Mount Automatically at system restart?, then type yes Mounting the File System Enter Create a Database to Store mvEnterprise DataMvefs/mvelv00/DB0 Mvefs/mvelv02/DB1 end How many frames in this data space5000 minimum? Configure the System to use Ethertape Update the System to use EthertapeVi /etc/pse.conf Xtiso Tcp Dev/xti/tcpUpdate the /etc/hosts File Index Etc/hostsMD-UPGRADE Utility
Top Page Image Contents