2.4 Configure the System to use Ethertape
2.4.1 Update the System to use Ethertape
For new installations, a system configuration file must be changed in order to use ethertape.
1.Ensure that you are logged in as root.
2.Edit the system configuration file. Type:
vi/etc/pse.conf
3.Locate the appropriate headings, remove the comment symbol from these lines if necessary, and save the changes.
#PSE communication protocols
d+ | xtiso | unixdg /dev/xti/unixdg # unix domain datagrams | ||
d+ | xtiso | unixst | /dev/xti/unixst | # unix domain |
d+ | xtiso | udp | /dev/xti/udp | # UDP/IP |
d+ | xtiso | tcp | /dev/xti/tcp | # TCP/IP |
# PSE modules |
|
| ||
m | timod |
|
| # TLI module |
m | tirdwr |
|
| # TLI read/write interface |
4. Reboot the machine to implement the changes.
mvEnterprise Release 4.1 on AIX | Installation Guide | Page 59 |