2.2 Configure Tape Devices for mvEnterprise on AIX
mvEnterprise relies on AIX to provide driver support for tape devices. These should be configured using smit. An example to add a 4mm DAT drive is given below.
1.At an AIX command shell, type smit. The System Management menu displays.
NOTE: The example screens shown here are intended to be representative of those you would see on your system. However, due to factors such as differing hardware, your system’s screen displays may vary from these examples.
If you can’t type in the entry, try pressing the appropriate function key.
2. Select Devices. The Devices screen displays.
mvEnterprise Release 4.1 on AIX | Installation Guide | Page 43 |