HP Q5693A manual Windows 2000 and Window XP, Windows 98 and Window Me

Sending a print job to an output bin that is different from the default

	Because you cannot specify a face-down output bin to send your print job to in the Stacker, Job
	Separator, and Sorter/Collator modes, the bin option for these modes is Output Bins 1-8(for
	printers) or Output Bins 2-8(for MFPs). When the MBM is connected to an MFP, output bin 1 is
	not available in the printer driver.
Note	The illustrations in this section show the text in English. They show screens that appear in the
	Mailbox mode. Depending on the operating system that you are using and what settings you have
	set, your screens might or might not look like these illustrations.
	Microsoft Windows

Windows 2000 and Window XP

1Open a document, and then click Print on the File menu.

2Click Setup or Properties. (The options might be different for your program.)

3Click the Output or Destination tab.

4In the Bin list, select an output bin, and then click OK.

Windows 98 and Window Me

1Open a document, and then click Print on the File menu.

2Click Setup or Properties. (The options might be different for your program.)

3Perform one of the following actions:

If you are using a PCL printer driver

• On the Output tab, select the appropriate output bin, and then click OK.

If you are using a PS printer driver

•Click the Paper tab, click the More Options button. In the More Paper Options dialog box, select the appropriate output bin from the Output Bin list. Click OK.

ENWW Sending a print job to an output bin that is different from the default 15