HP Pro K8600 manual Load media, To load Tray 1 main tray, Media Left Right Top Bottom Margin

Chapter 3

(continued)

Media	(1) Left	(2) Right	(3) Top	(4) Bottom
	margin	margin	margin	margin*
				NOTE: If
				you are
				using the
				duplexer
				(available
				with some
				models), the
				minimum
				bottom
				margin must
				match or
				exceed 20
				mm (0.79
				inch).
Envelopes	3.3 mm (0.13	3.3 mm (0.13	16.5 mm	16.5 mm
	inch)	inch)	(0.65 inch)	(0.65 inch)
Panorama	3.3 mm (0.13	3.3 mm (0.13	3.3 mm (0.13	3.3 mm (0.13
	inch)	inch)	inch)	inch)

*To achieve this margin setting on a computer running Windows, click the Advanced tab in the print driver, and select Minimize Margins.

Load media

This section provides instructions for loading media into the device.

To load Tray 1 (main tray)

1.Lift the output tray.

2.Insert the media print-side down along the right of the tray. Make sure the stack of media aligns with the right and back edges of the tray, and does not exceed the line marking in the tray.

NOTE: Do not load paper while the device is printing.

18 Use the device