HP Pro 8500, 8500 DN, 8500 N manual T e

EN

N o t e

Follow steps 10-13 to attach the five stabilizing legs to the bottom of tray 4. If the five stabilizing legs (which are in addition to the four locking wheels) are already attached, proceed to step 14.

10Locate the five stabilizing legs that came with the printer.

11Locate the five guides for the stabilizing legs on the bottom of tray 4—two guides at the front edge, one on the right edge, and two on the back edge.

12Insert a stabilizing leg into one of the guides and push the leg into the guide until it stops.

13Repeat step 12 above to attach the other four stabilizing legs.

Step 2: Unpacking the Printer 7