EN
Loading media into trays 2 and 3
N o t e
Before loading media into trays 2 and 3, verify that the spacers were removed from both trays when “Step 2: Unpacking the Printer” was performed.
1Firmly grip the handle in the center of tray 2, squeeze the release lever, and pull the tray out until it stops.
Depending on your country, input trays arrive adjusted for either A4- or letter- sized media. To load A4- or
2Turn the
3Slide the front media guide to the size that matches the media size you are loading.
4Turn the
Step 7: Loading the Input Trays 25